Measurement of lubricating film thickness in low elastic modulus lined bearings, with particular reference to models of cushion form bearings for total joint replacements: Part 2: Squeeze-Film Motion

An optical interferometry technique has been successfully used to study the lubricant film thickness in a compliant layered bearing model for total joint replacements under squeeze-film motion. Experiments have been carried out for both thin and thick layers of compliant bearing material. It has been demonstrated that the film thickness patterns depend significantly upon the layer thickness if other parameters are kept constant. For the thin layer, the film thickness in the contact region was found to be essentially uniform and quite good agreement was found with the theoretical predictions based upon a simplified analysis due to Dowson et al. (13) and Higginson (14). However, for the thick layer, a central dimple or pocket was formed and a relatively large difference was found between the experimentally determined central film thickness and the simple parallel circular disc theoretical predictions. The practical implications of the present results are discussed in relation to the lubrication mechanism in the natural synovial joint and its replacement.