Macro-segregation, dynamics of interface and stresses in high pressure LEC grown crystals

High dislocation density and strong dopant inhomogeneities have been found in high pressure liquid-encapsulated Czochralski (HPLEC) grown crystals. The origin and underlying mechanisms of these defects are attributed to the complex nature of transport phenomena in the HPLEC system. Our integrated computer model (MASTRAPP) can simulate this process by calculating the flow and heat transfer in both the melt and the gas, and thermal-elastic stress in the crystal. In this work, this model has been further extended to investigate the development of thermal stress in the growing crystal and the redistribution of dopant in the melt. The results for InP growth show complex gas flow and heat transfer pattern in the system. Two large stress spots are predicted by the model, one at the edge of the crystal just above the encapsulant layer and the other in the top corner of the crystal. Although the stress always remains largest at the first location, its value decreases as the crystal grows, due to the enhanced cooling of the crystal. A curved crystal/melt interface is also found to introduce high thermal stresses in its vicinity, which may be dangerous because of a high temperature at the interface and thus a low strength of the crystal. The model also predicts both radial and longitudinal dopant segregation in the growing crystal, and shows that the dopant redistribution in the melt is caused by the complex flow pattern in the melt. This is the first time, that a strong radial dopant segregation has been predicted based on a comprehensive flow model for a HPLEC growth.