Skip to main navigation Skip to search Skip to main content

Lubrication modelling of artificial hip joints

  • University of Leeds

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

15 Scopus citations

Abstract

Lubrication modelling of artificial hip joints was considered. In particular, a mixed lubrication model was developed for artificial hip joints employing ultra high molecular weight polyethylene cups, and both boundary contact and elastohydrodynamic lubrication were solved simultaneously. A full fluid-film lubrication regime was predicted in the artificial hip joint with perfectly smooth bearing surfaces under physiological conditions. However, the introduction of a simple axisymmetric sinusoidal waviness in the radial direction reduced significantly the lubricant film thickness, resulting in a mixed lubrication regime at a much higher viscosity than that of peri-prosthetic synovial fluid.

Original languageEnglish
Title of host publicationIUTAM Symposium on Elastohydrodynamics and Micro-elastohydrodynamics
Pages385-396
Number of pages12
DOIs
StatePublished - 2006
Externally publishedYes

Publication series

NameSolid Mechanics and its Applications
Volume134
ISSN (Print)0925-0042

Keywords

  • Artificial hip joint
  • Ball-in-socket
  • Mixed lubrication

Fingerprint

Dive into the research topics of 'Lubrication modelling of artificial hip joints'. Together they form a unique fingerprint.

Cite this