Low-frequency chatter suppression for robotic milling using a novel MRF absorber

Robotic milling has a unique advantage for large and complex parts. However, it is extremely prone to low-frequency chatter due to the robot structure mode. In robotic milling, low-frequency chatter has a huge impact on machining quality and efficiency. In this paper, a novel MRF (Magnetorheological fluid) absorber is used to suppress low-frequency chatter during robotic milling based on the proposed low-frequency chatter suppression strategy. First, the GPR (Gaussian process regression) model is used to predict the impulse response function based on a few measured impulse response functions. Next, a cutting force model is developed considering the tool runout and the robot structure mode. The parameters and coefficients of the cutting force model are optimized by the measured cutting forces. Then, the low-frequency chatter frequency is predicted considering the modal coupling effect based on the predicted impulse response function and the simulated cutting force. Finally, an MRF absorber is designed based on the chatter frequency range. The controlled storage modulus of the MRF in the pre-yield region enables a wider frequency shift characteristic of the designed MRF absorber. The MRF absorber controls the input current based on the predicted low-frequency chatter frequency to achieve chatter suppression during robotic milling. Robotic milling experiments verified that the MRF absorber can effectively suppress low-frequency chatter. The experimental results show that the Energy Ratio Chatter Indicator of the industrial robot with MRF absorber is less than 0.1 under different milling conditions.