Locating the gas leakage source in the atmosphere using the dispersion wave method

A new and simple method for locating emission source was proposed in this work based on gas dynamic dispersion information. The simulation of the unsteady state dispersion of leakage gas emission from the geosequestration project showed that the transportation process of emission gases in the atmosphere is similar to wave propagation, and the time parameter of the dispersion wave is linearly related to the downwind distance. Therefore, monitoring the dispersion wave at different downwind positions can be used to estimate the leakage source position. An estimation formula for locating emission sources was derived. First, an estimation formula for locating emission sources was derived under some initial assumptions. Then, the deviation of the location formula was investigated using a computational fluid dynamics (CFD) model and analytic solution to get the offset distance under different conditions. The results showed that the average distance is stable for a certain atmosphere and terrestrial conditions. This method needs no more than 3 sensors’ dynamic information to locate the emission source, and hence it is highly useful for conditions with limited sensors. A numerical test demonstrated that the absolute error of the source estimation is within the range of 1–30 m. Finally, experimental tests were conducted to verify the feasibility of the source location with dispersion waves. Therefore, the dispersion wave monitor is a potentially simple and feasible way to estimate the source location for gas emission event management with limited sensors in the process industries.