Latest progress on R&D of ITER DFLL-TBM in China

Qunying Huang; Qingsheng Wu; Shaojun Liu; Chunjing Li; Bo Huang; L. Peng; Shuhui Zheng; Qian Han; Yican Wu

doi:10.1016/j.fusengdes.2011.03.099

Latest progress on R&D of ITER DFLL-TBM in China

Qunying Huang
, Qingsheng Wu
, Shaojun Liu
, Chunjing Li
, Bo Huang
, L. Peng
, Shuhui Zheng
, Qian Han
, Yican Wu

School of Energy and Power Engineering

CAS - Institute of Plasma Physics
University of Science and Technology of China

Research output: Contribution to journal › Article › peer-review

29 Scopus citations

Abstract

The China Low Activation Martensitic (CLAM) steel is being developed in ASIPP (Institute of Plasma Physics, Chinese Academy of Sciences) under wide collaboration with many institutes and universities. A heat of 1.2 tons was fabricated and tested. The tested main compositions are eligible and without segregation. The tensile, Charpy impact and fracture toughness tests showed that its mechanical properties were similar to those of small ingots of CLAM steel. Also, joining techniques such as Electron Beam Welding (EBW), Hot Isostatic Pressing-Diffusion Welding (HIP-DW) and fabrication techniques of rectangular tube with CLAM steel were studied in details. And a 1/3 scaled mockup of Test Blanket Module (TBM) by P91 are being fabricated to explore TBM fabrication technology.

Original language	English
Pages (from-to)	2611-2615
Number of pages	5
Journal	Fusion Engineering and Design
Volume	86
Issue number	9-11
DOIs	https://doi.org/10.1016/j.fusengdes.2011.03.099
State	Published - Oct 2011

Keywords

CLAM steel
R&D
TBM

Access to Document

10.1016/j.fusengdes.2011.03.099

Cite this

@article{9f8977e0789d4713b60949cbd913c411,

title = "Latest progress on R\&D of ITER DFLL-TBM in China",

abstract = "The China Low Activation Martensitic (CLAM) steel is being developed in ASIPP (Institute of Plasma Physics, Chinese Academy of Sciences) under wide collaboration with many institutes and universities. A heat of 1.2 tons was fabricated and tested. The tested main compositions are eligible and without segregation. The tensile, Charpy impact and fracture toughness tests showed that its mechanical properties were similar to those of small ingots of CLAM steel. Also, joining techniques such as Electron Beam Welding (EBW), Hot Isostatic Pressing-Diffusion Welding (HIP-DW) and fabrication techniques of rectangular tube with CLAM steel were studied in details. And a 1/3 scaled mockup of Test Blanket Module (TBM) by P91 are being fabricated to explore TBM fabrication technology.",

keywords = "CLAM steel, R\&D, TBM",

author = "Qunying Huang and Qingsheng Wu and Shaojun Liu and Chunjing Li and Bo Huang and L. Peng and Shuhui Zheng and Qian Han and Yican Wu",

year = "2011",

month = oct,

doi = "10.1016/j.fusengdes.2011.03.099",

language = "英语",

volume = "86",

pages = "2611--2615",

journal = "Fusion Engineering and Design",

issn = "0920-3796",

publisher = "Elsevier B.V.",

number = "9-11",

}

TY - JOUR

T1 - Latest progress on R&D of ITER DFLL-TBM in China

AU - Huang, Qunying

AU - Wu, Qingsheng

AU - Liu, Shaojun

AU - Li, Chunjing

AU - Huang, Bo

AU - Peng, L.

AU - Zheng, Shuhui

AU - Han, Qian

AU - Wu, Yican

PY - 2011/10

Y1 - 2011/10

N2 - The China Low Activation Martensitic (CLAM) steel is being developed in ASIPP (Institute of Plasma Physics, Chinese Academy of Sciences) under wide collaboration with many institutes and universities. A heat of 1.2 tons was fabricated and tested. The tested main compositions are eligible and without segregation. The tensile, Charpy impact and fracture toughness tests showed that its mechanical properties were similar to those of small ingots of CLAM steel. Also, joining techniques such as Electron Beam Welding (EBW), Hot Isostatic Pressing-Diffusion Welding (HIP-DW) and fabrication techniques of rectangular tube with CLAM steel were studied in details. And a 1/3 scaled mockup of Test Blanket Module (TBM) by P91 are being fabricated to explore TBM fabrication technology.

AB - The China Low Activation Martensitic (CLAM) steel is being developed in ASIPP (Institute of Plasma Physics, Chinese Academy of Sciences) under wide collaboration with many institutes and universities. A heat of 1.2 tons was fabricated and tested. The tested main compositions are eligible and without segregation. The tensile, Charpy impact and fracture toughness tests showed that its mechanical properties were similar to those of small ingots of CLAM steel. Also, joining techniques such as Electron Beam Welding (EBW), Hot Isostatic Pressing-Diffusion Welding (HIP-DW) and fabrication techniques of rectangular tube with CLAM steel were studied in details. And a 1/3 scaled mockup of Test Blanket Module (TBM) by P91 are being fabricated to explore TBM fabrication technology.

KW - CLAM steel

KW - R&D

KW - TBM

UR - https://www.scopus.com/pages/publications/80054025196

U2 - 10.1016/j.fusengdes.2011.03.099

DO - 10.1016/j.fusengdes.2011.03.099

M3 - 文章

AN - SCOPUS:80054025196

SN - 0920-3796

VL - 86

SP - 2611

EP - 2615

JO - Fusion Engineering and Design

JF - Fusion Engineering and Design

IS - 9-11

ER -

Latest progress on R&D of ITER DFLL-TBM in China

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this