Skip to main navigation Skip to search Skip to main content

Ionic polymer-metal composites actuator driven by the pulse current signal of triboelectric nanogenerator

  • Dan Yang
  • , Xinxin Kong
  • , Yufeng Ni
  • , Zewei Ren
  • , Shuyao Li
  • , Jinhui Nie
  • , Xiangyu Chen
  • , Liqun Zhang
  • Beijing Institute of Petrochemical Technology
  • Chinese Academy of Sciences
  • University of Chinese Academy of Sciences
  • Beijing University of Chemical Technology

Research output: Contribution to journal › Article › peer-review

41 Scopus citations

Abstract

Ionic polymer-metal composites (IPMCs), a kind of electroactive polymer, have been considered as artificial muscle due to their deformation in response to electrical stimulation. However, the needing of external power supply severely limits IPMC's wide applications. Herein, newly developed energy harvesting technique of triboelectric nanogenerator (TENG) is used to directly drive IPMC, in order to establish a self-powered actuation system. Even though IPMC cannot utilize the voltage signal from TENG, it is possible for IPMC to accumulate the transferred charge from several motion cycles of TENG. Hence, the combined TENG-IPMC system also develops a new approach for utilizing the current signal from TENG as the control signal. Comparing with IPMC under the drive of power source, TENG-IPMC system needs much lower (about 0.1%) transferred charges to achieve the same bending angle than that of DC power. The actuation of TENG-IPMC system can be controlled precisely through the design of TENG, which can be utilized for several intelligent electromechanical applications, including self-powered gripper, tunable laser projector, and soft robotic in liquid. The TENG-IPMC system has many advantages, such as high energy conversion rate, small size, and low cost, which will significantly improve the usability and portability of IPMC.

Original languageEnglish
Article number104139
JournalNano Energy
Volume66
DOIs
StatePublished - Dec 2019
Externally publishedYes

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 7 - Affordable and Clean Energy
    SDG 7 Affordable and Clean Energy

Keywords

  • Ionic polymer-metal composite
  • Laser modulation
  • Smart actuator
  • Triboelectric nanogenerator

Fingerprint

Dive into the research topics of 'Ionic polymer-metal composites actuator driven by the pulse current signal of triboelectric nanogenerator'. Together they form a unique fingerprint.

Cite this