Investigation of orthogonal experiment for fabrication of soldering joint for a 4 T HTS coil

Feng Zhou; Jun Sheng Cheng; Ying Xu; Shou Sen Song; Yin Ming Dai; Qiu Liang Wang

doi:10.1109/ASEMD.2013.6780828

Investigation of orthogonal experiment for fabrication of soldering joint for a 4 T HTS coil

Feng Zhou
, Jun Sheng Cheng
, Ying Xu
, Shou Sen Song
, Yin Ming Dai
, Qiu Liang Wang

School of Electrical Engineering

CAS - Institute of Electrical Engineering

Research output: Contribution to conference › Paper › peer-review

3 Scopus citations

Abstract

Joining process of individual BSCCO conductors is inevitable; because the double pancake coils need to be connected with each other. Since the resistance characteristics of joint can affect the stability of NMR system seriously, we did a research on soldering joint in this work. As resistance characteristics of soldering joint can vary with conditions such as joint length, thickness, temperature and so on, we conducted short sample joint experiments with orthogonal experimental design. The significance of each condition's influence was calculated quantitatively, andan appropriate soldering condition was put forward, under which the lowest joint resistance can be obtained. We also applied this appropriate soldering condition to fabricate joints for a 4 T HTS coil and tested its practical electrical properties.

Original language	English
Pages	492-493
Number of pages	2
DOIs	https://doi.org/10.1109/ASEMD.2013.6780828
State	Published - 2013
Event	2013 IEEE International Conference on Applied Superconductivity and Electromagnetic Devices, ASEMD 2013 - Beijing, China Duration: 25 Oct 2013 → 27 Oct 2013

Conference

Conference	2013 IEEE International Conference on Applied Superconductivity and Electromagnetic Devices, ASEMD 2013
Country/Territory	China
City	Beijing
Period	25/10/13 → 27/10/13

Keywords

BSCCO
electrical properties
HTS coil
orthogonal experiment
soldering joint

Access to Document

10.1109/ASEMD.2013.6780828

Cite this

@conference{27c31f3466844ab6810309db140cfa79,

title = "Investigation of orthogonal experiment for fabrication of soldering joint for a 4 T HTS coil",

abstract = "Joining process of individual BSCCO conductors is inevitable; because the double pancake coils need to be connected with each other. Since the resistance characteristics of joint can affect the stability of NMR system seriously, we did a research on soldering joint in this work. As resistance characteristics of soldering joint can vary with conditions such as joint length, thickness, temperature and so on, we conducted short sample joint experiments with orthogonal experimental design. The significance of each condition's influence was calculated quantitatively, andan appropriate soldering condition was put forward, under which the lowest joint resistance can be obtained. We also applied this appropriate soldering condition to fabricate joints for a 4 T HTS coil and tested its practical electrical properties.",

keywords = "BSCCO, electrical properties, HTS coil, orthogonal experiment, soldering joint",

author = "Feng Zhou and Cheng, \{Jun Sheng\} and Ying Xu and Song, \{Shou Sen\} and Dai, \{Yin Ming\} and Wang, \{Qiu Liang\}",

year = "2013",

doi = "10.1109/ASEMD.2013.6780828",

language = "英语",

pages = "492--493",

note = "2013 IEEE International Conference on Applied Superconductivity and Electromagnetic Devices, ASEMD 2013 ; Conference date: 25-10-2013 Through 27-10-2013",

}

Zhou, F, Cheng, JS, Xu, Y, Song, SS, Dai, YM & Wang, QL 2013, 'Investigation of orthogonal experiment for fabrication of soldering joint for a 4 T HTS coil', Paper presented at 2013 IEEE International Conference on Applied Superconductivity and Electromagnetic Devices, ASEMD 2013, Beijing, China, 25/10/13 - 27/10/13 pp. 492-493. https://doi.org/10.1109/ASEMD.2013.6780828

TY - CONF

T1 - Investigation of orthogonal experiment for fabrication of soldering joint for a 4 T HTS coil

AU - Zhou, Feng

AU - Cheng, Jun Sheng

AU - Xu, Ying

AU - Song, Shou Sen

AU - Dai, Yin Ming

AU - Wang, Qiu Liang

PY - 2013

Y1 - 2013

N2 - Joining process of individual BSCCO conductors is inevitable; because the double pancake coils need to be connected with each other. Since the resistance characteristics of joint can affect the stability of NMR system seriously, we did a research on soldering joint in this work. As resistance characteristics of soldering joint can vary with conditions such as joint length, thickness, temperature and so on, we conducted short sample joint experiments with orthogonal experimental design. The significance of each condition's influence was calculated quantitatively, andan appropriate soldering condition was put forward, under which the lowest joint resistance can be obtained. We also applied this appropriate soldering condition to fabricate joints for a 4 T HTS coil and tested its practical electrical properties.

AB - Joining process of individual BSCCO conductors is inevitable; because the double pancake coils need to be connected with each other. Since the resistance characteristics of joint can affect the stability of NMR system seriously, we did a research on soldering joint in this work. As resistance characteristics of soldering joint can vary with conditions such as joint length, thickness, temperature and so on, we conducted short sample joint experiments with orthogonal experimental design. The significance of each condition's influence was calculated quantitatively, andan appropriate soldering condition was put forward, under which the lowest joint resistance can be obtained. We also applied this appropriate soldering condition to fabricate joints for a 4 T HTS coil and tested its practical electrical properties.

KW - BSCCO

KW - electrical properties

KW - HTS coil

KW - orthogonal experiment

KW - soldering joint

UR - https://www.scopus.com/pages/publications/84899091030

U2 - 10.1109/ASEMD.2013.6780828

DO - 10.1109/ASEMD.2013.6780828

M3 - 论文

AN - SCOPUS:84899091030

SP - 492

EP - 493

T2 - 2013 IEEE International Conference on Applied Superconductivity and Electromagnetic Devices, ASEMD 2013

Y2 - 25 October 2013 through 27 October 2013

ER -

Investigation of orthogonal experiment for fabrication of soldering joint for a 4 T HTS coil

Abstract

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this