Skip to main navigation Skip to search Skip to main content

Influences of preparation technology on the flashover characteristics of machinable ceramics in vacuum

  • Xi'an Jiaotong University

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Scopus citations

Abstract

This paper probes into the influences of preparation technology, mainly crystallization time, on the flashover characteristics of machinable ceramics under 0.4/2.5 μ s impulse voltage in vacuum. Several machinable ceramic samples are prepared with the same procedure under different crystallization time. To study the association between crystallization time and flashover characteristics, the surface microstructures of samples are observed by SEM, while the surface electric strength of each sample is tested by flashover experiments in vacuum. It is revealed that the flashover characteristics vary with their crystallization time, and the sample with less crystallization time has a better flashover performance. From the SEM analysis of the samples, the crystallization time of machinable ceramic can affect its microstructure. The longer crystallization time is, the bigger grains will grow. And this will contribute to an influence on the flashover performance of machinable ceramics.

Original languageEnglish
Title of host publicationISDEIV 2008 - Proceedings of the 23rd International Symposium on Discharges and Electrical Insulation in Vacuum
Pages595-598
Number of pages4
DOIs
StatePublished - 2008
Event23rd International Symposium on Discharges and Electrical Insulation in Vacuum, 23rd ISDEIV - Bucharest, Romania
Duration: 15 Sep 2008 → 19 Sep 2008

Publication series

NameProceedings - International Symposium on Discharges and Electrical Insulation in Vacuum, ISDEIV
Volume2
ISSN (Print)1093-2941

Conference

Conference23rd International Symposium on Discharges and Electrical Insulation in Vacuum, 23rd ISDEIV
Country/TerritoryRomania
CityBucharest
Period15/09/08 → 19/09/08

Fingerprint

Dive into the research topics of 'Influences of preparation technology on the flashover characteristics of machinable ceramics in vacuum'. Together they form a unique fingerprint.

Cite this