Influence of blending temperature on fluorescence properties of silicone rubber matrix Eu(TTA)2 (phen) (MA) composites

Xiaofei Wu; Li Liu; Wan Zhang; Shui Hu; Riguang Jin; Liqun Zhang

doi:10.1016/S1002-0721(07)60323-8

Influence of blending temperature on fluorescence properties of silicone rubber matrix Eu(TTA)₂ (phen) (MA) composites

Xiaofei Wu
, Li Liu
, Wan Zhang
, Shui Hu
, Riguang Jin
, Liqun Zhang

Beijing University of Chemical Technology

Research output: Contribution to journal › Article › peer-review

3 Scopus citations

Abstract

A series of fluorescent composites were prepared by blending silicone rubber with Eu(TTA)₂(phen) (MA). The influence of mechanical blending temperature on fluorescent intensity of composites and dispersion of rare earth complexes in the SiR matrix were investigated. As for the cured rubber, it is found that its fluorescent intensity is relatively low compared with that of uncured rubber. Low temperature is beneficial to dispersion of Eu(TTA)₂(phen) (MA) homogeneously. When the amount of rare earth complexes is low, the fluorescent intensity of composites prepared by mechanical blending method above melting point of Eu(TTA)₂(phen)(MA) is much higher than that of composites prepared below melting point.

Original language	English
Pages (from-to)	61-63
Number of pages	3
Journal	Journal of Rare Earths
Volume	24
Issue number	1 SUPPL. 2
DOIs	https://doi.org/10.1016/S1002-0721(07)60323-8
State	Published - Dec 2006
Externally published	Yes

Keywords

Fluorescence property
Mechanical blending temperature
Rare earth complex
Silicone rubber

Access to Document

10.1016/S1002-0721(07)60323-8

Cite this

@article{e3112b36605f444f8275265df8e86b50,

title = "Influence of blending temperature on fluorescence properties of silicone rubber matrix Eu(TTA)2 (phen) (MA) composites",

abstract = "A series of fluorescent composites were prepared by blending silicone rubber with Eu(TTA)2(phen) (MA). The influence of mechanical blending temperature on fluorescent intensity of composites and dispersion of rare earth complexes in the SiR matrix were investigated. As for the cured rubber, it is found that its fluorescent intensity is relatively low compared with that of uncured rubber. Low temperature is beneficial to dispersion of Eu(TTA)2(phen) (MA) homogeneously. When the amount of rare earth complexes is low, the fluorescent intensity of composites prepared by mechanical blending method above melting point of Eu(TTA)2(phen)(MA) is much higher than that of composites prepared below melting point.",

keywords = "Fluorescence property, Mechanical blending temperature, Rare earth complex, Silicone rubber",

author = "Xiaofei Wu and Li Liu and Wan Zhang and Shui Hu and Riguang Jin and Liqun Zhang",

year = "2006",

month = dec,

doi = "10.1016/S1002-0721(07)60323-8",

language = "英语",

volume = "24",

pages = "61--63",

journal = "Journal of Rare Earths",

issn = "1002-0721",

publisher = "Editorial Office of Chinese Rare Earths",

number = "1 SUPPL. 2",

}

TY - JOUR

T1 - Influence of blending temperature on fluorescence properties of silicone rubber matrix Eu(TTA)2 (phen) (MA) composites

AU - Wu, Xiaofei

AU - Liu, Li

AU - Zhang, Wan

AU - Hu, Shui

AU - Jin, Riguang

AU - Zhang, Liqun

PY - 2006/12

Y1 - 2006/12

N2 - A series of fluorescent composites were prepared by blending silicone rubber with Eu(TTA)2(phen) (MA). The influence of mechanical blending temperature on fluorescent intensity of composites and dispersion of rare earth complexes in the SiR matrix were investigated. As for the cured rubber, it is found that its fluorescent intensity is relatively low compared with that of uncured rubber. Low temperature is beneficial to dispersion of Eu(TTA)2(phen) (MA) homogeneously. When the amount of rare earth complexes is low, the fluorescent intensity of composites prepared by mechanical blending method above melting point of Eu(TTA)2(phen)(MA) is much higher than that of composites prepared below melting point.

AB - A series of fluorescent composites were prepared by blending silicone rubber with Eu(TTA)2(phen) (MA). The influence of mechanical blending temperature on fluorescent intensity of composites and dispersion of rare earth complexes in the SiR matrix were investigated. As for the cured rubber, it is found that its fluorescent intensity is relatively low compared with that of uncured rubber. Low temperature is beneficial to dispersion of Eu(TTA)2(phen) (MA) homogeneously. When the amount of rare earth complexes is low, the fluorescent intensity of composites prepared by mechanical blending method above melting point of Eu(TTA)2(phen)(MA) is much higher than that of composites prepared below melting point.

KW - Fluorescence property

KW - Mechanical blending temperature

KW - Rare earth complex

KW - Silicone rubber

UR - https://www.scopus.com/pages/publications/33846937644

U2 - 10.1016/S1002-0721(07)60323-8

DO - 10.1016/S1002-0721(07)60323-8

M3 - 文章

AN - SCOPUS:34249906743

SN - 1002-0721

VL - 24

SP - 61

EP - 63

JO - Journal of Rare Earths

JF - Journal of Rare Earths

IS - 1 SUPPL. 2

ER -

Influence of blending temperature on fluorescence properties of silicone rubber matrix Eu(TTA)₂ (phen) (MA) composites

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this