Skip to main navigation Skip to search Skip to main content

Heat transfer and pressure drop characteristics of a new manifold microchannel heat sink with an ultra-high heat flux of 1425 W/cm2 cooled by water

  • Zheng Dao Li
  • , Li Chen
  • , Lei Chen
  • , Ya Ling He
  • , Wen Quan Tao
  • Xi'an Jiaotong University

Research output: Contribution to journal › Article › peer-review

15 Scopus citations

Abstract

The thermal management of ultra-high heat flux chips has become an urgent problem that needs to be addressed. For the manifold microchannels, previous studies have generally treated the hot manifold side and cold manifold side as a whole, considering that when the structure of one side changes, the other side should maintain the same symmetrical structural configuration. In fact, due to the different flow patterns on the hot and cold manifold sides, they should not be simply treated as a whole. Instead, the most suitable heat transfer enhancement strategies for each side should be individually employed to achieve the best cooling performance. This paper focuses on this novel design concept and proposes a new manifold microchannel (termed PFMMC). The major differences of PFMMC from that reported in Nature 2020(585) are in three aspects. First, the hot manifold side have the same spanwise width, rather than the gradually expanding structure corresponding to the cold manifold side. Second, microfins are added only to the hot-side microchannels. Third, the microchannels have a narrow inlet and wider outlet to complement the fins. A nearly optimum construction is obtained. Numerical results show that it can reach an ultra-high heat flux up to 1425 W/cm2 by using water coolant with ΔP being only 9762.9 Pa. This demonstrates that the hot manifold side has greater enhancement potential and that the enhancement strategies for the hot and cold sides should be considered separately in future structural designs.

Original languageEnglish
Article number127721
JournalInternational Journal of Heat and Mass Transfer
Volume255
DOIs
StatePublished - Feb 2026

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 7 - Affordable and Clean Energy
    SDG 7 Affordable and Clean Energy

Keywords

  • Chip heat dissipation
  • Energy efficiency
  • Manifold microchannel
  • Novel design concept
  • Ultra-high heat flux

Fingerprint

Dive into the research topics of 'Heat transfer and pressure drop characteristics of a new manifold microchannel heat sink with an ultra-high heat flux of 1425 W/cm2 cooled by water'. Together they form a unique fingerprint.

Cite this