Hardware implementation of a four-terminal HVDC test-bed

Yalong Li; Xiaojie Shi; Bo Liu; Fred Wang; Leon M. Tolbert; Wanjun Lei

doi:10.1109/ECCE.2015.7310414

Hardware implementation of a four-terminal HVDC test-bed

Yalong Li
, Xiaojie Shi
, Bo Liu
, Fred Wang
, Leon M. Tolbert
, Wanjun Lei

School of Electrical Engineering

University of Tennessee

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

6 Scopus citations

Abstract

This paper presents the implementation of a scaled 4-terminal high-voltage direct current (HVDC) test-bed. The hardware construction, control scheme and communication architecture are described. The typical scenarios such as system start-up, station online recommission, power variation, online mode transition and station failure are emulated in the test-bed. A dc line current control is proposed to allow online disconnecting dc lines by using HVDC disconnectors with low current interrupting capability instead of the expensive dc circuit breaker. This control can be further utilized for dc line current limiting function. When a dc line is overloaded, the line current control will be automatically activated to regulate current below the allowable maximum value.

Original language	English
Title of host publication	2015 IEEE Energy Conversion Congress and Exposition, ECCE 2015
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	5363-5370
Number of pages	8
ISBN (Electronic)	9781467371506
DOIs	https://doi.org/10.1109/ECCE.2015.7310414
State	Published - 27 Oct 2015
Event	7th Annual IEEE Energy Conversion Congress and Exposition, ECCE 2015 - Montreal, Canada Duration: 20 Sep 2015 → 24 Sep 2015

Publication series

Name	2015 IEEE Energy Conversion Congress and Exposition, ECCE 2015

Conference

Conference	7th Annual IEEE Energy Conversion Congress and Exposition, ECCE 2015
Country/Territory	Canada
City	Montreal
Period	20/09/15 → 24/09/15

Access to Document

10.1109/ECCE.2015.7310414

Cite this

Li, Y., Shi, X., Liu, B., Wang, F., Tolbert, L. M., & Lei, W. (2015). Hardware implementation of a four-terminal HVDC test-bed. In 2015 IEEE Energy Conversion Congress and Exposition, ECCE 2015 (pp. 5363-5370). Article 7310414 (2015 IEEE Energy Conversion Congress and Exposition, ECCE 2015). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ECCE.2015.7310414

@inproceedings{a0d01c6a4b2147f4a5568c509ede011c,

title = "Hardware implementation of a four-terminal HVDC test-bed",

abstract = "This paper presents the implementation of a scaled 4-terminal high-voltage direct current (HVDC) test-bed. The hardware construction, control scheme and communication architecture are described. The typical scenarios such as system start-up, station online recommission, power variation, online mode transition and station failure are emulated in the test-bed. A dc line current control is proposed to allow online disconnecting dc lines by using HVDC disconnectors with low current interrupting capability instead of the expensive dc circuit breaker. This control can be further utilized for dc line current limiting function. When a dc line is overloaded, the line current control will be automatically activated to regulate current below the allowable maximum value.",

author = "Yalong Li and Xiaojie Shi and Bo Liu and Fred Wang and Tolbert, \{Leon M.\} and Wanjun Lei",

note = "Publisher Copyright: {\textcopyright} 2015 IEEE.; 7th Annual IEEE Energy Conversion Congress and Exposition, ECCE 2015 ; Conference date: 20-09-2015 Through 24-09-2015",

year = "2015",

month = oct,

day = "27",

doi = "10.1109/ECCE.2015.7310414",

language = "英语",

series = "2015 IEEE Energy Conversion Congress and Exposition, ECCE 2015",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "5363--5370",

booktitle = "2015 IEEE Energy Conversion Congress and Exposition, ECCE 2015",

}

Li, Y, Shi, X, Liu, B, Wang, F, Tolbert, LM & Lei, W 2015, Hardware implementation of a four-terminal HVDC test-bed. in 2015 IEEE Energy Conversion Congress and Exposition, ECCE 2015., 7310414, 2015 IEEE Energy Conversion Congress and Exposition, ECCE 2015, Institute of Electrical and Electronics Engineers Inc., pp. 5363-5370, 7th Annual IEEE Energy Conversion Congress and Exposition, ECCE 2015, Montreal, Canada, 20/09/15. https://doi.org/10.1109/ECCE.2015.7310414

Hardware implementation of a four-terminal HVDC test-bed. / Li, Yalong; Shi, Xiaojie; Liu, Bo et al.
2015 IEEE Energy Conversion Congress and Exposition, ECCE 2015. Institute of Electrical and Electronics Engineers Inc., 2015. p. 5363-5370 7310414 (2015 IEEE Energy Conversion Congress and Exposition, ECCE 2015).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Hardware implementation of a four-terminal HVDC test-bed

AU - Li, Yalong

AU - Shi, Xiaojie

AU - Liu, Bo

AU - Wang, Fred

AU - Tolbert, Leon M.

AU - Lei, Wanjun

PY - 2015/10/27

Y1 - 2015/10/27

N2 - This paper presents the implementation of a scaled 4-terminal high-voltage direct current (HVDC) test-bed. The hardware construction, control scheme and communication architecture are described. The typical scenarios such as system start-up, station online recommission, power variation, online mode transition and station failure are emulated in the test-bed. A dc line current control is proposed to allow online disconnecting dc lines by using HVDC disconnectors with low current interrupting capability instead of the expensive dc circuit breaker. This control can be further utilized for dc line current limiting function. When a dc line is overloaded, the line current control will be automatically activated to regulate current below the allowable maximum value.

AB - This paper presents the implementation of a scaled 4-terminal high-voltage direct current (HVDC) test-bed. The hardware construction, control scheme and communication architecture are described. The typical scenarios such as system start-up, station online recommission, power variation, online mode transition and station failure are emulated in the test-bed. A dc line current control is proposed to allow online disconnecting dc lines by using HVDC disconnectors with low current interrupting capability instead of the expensive dc circuit breaker. This control can be further utilized for dc line current limiting function. When a dc line is overloaded, the line current control will be automatically activated to regulate current below the allowable maximum value.

UR - https://www.scopus.com/pages/publications/84963626565

U2 - 10.1109/ECCE.2015.7310414

DO - 10.1109/ECCE.2015.7310414

M3 - 会议稿件

AN - SCOPUS:84963626565

T3 - 2015 IEEE Energy Conversion Congress and Exposition, ECCE 2015

SP - 5363

EP - 5370

BT - 2015 IEEE Energy Conversion Congress and Exposition, ECCE 2015

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 7th Annual IEEE Energy Conversion Congress and Exposition, ECCE 2015

Y2 - 20 September 2015 through 24 September 2015

ER -

Hardware implementation of a four-terminal HVDC test-bed

Abstract

Publication series

Conference

Access to Document

Other files and links

Fingerprint

Cite this