Flow regime recognition in a long pipeline-riser system based on signals at the top of the riser

To identify conveniently multiphase flow regimes in subsea pipeline-risers, we study in this paper experimentally two-phase flows in a 1657 m long pipeline with an S-shaped riser to simulate field experiment, within a wide range of gas and liquid velocities. Three flow regimes, namely severe slugging, transitional flows, and stable flows, are analyzed based on three differential pressure and one pressure signals at the top of the riser; comparatively speaking, the positions of these signals in the experimental system are similar to those of the sea level signals in industrial fields, which are easy and less expensive to obtain. The obtained signals are decomposed into six scales via a multi-scale wavelet analysis, and further four statistical parameters on each scale are extracted, including mean values, standard deviations, ranges, and mean values of absolute. We compared the effects of six SVM classifiers with different kernel functions on the recognition rate of flow regimes, and it is found the recognition rates of SVM classifier with quadratic and cubic kernel functions are the highest. Further, the principal component analysis is employed to reduce the dimension of statistical parameters and it indicates that the recognition rate tends to increase with the rising number of principal components from 1 to 6, and it remains constant if the principal component number is further increased. Moreover, The results suggest that the recognition rate obtained from the pressure difference between the top of the riser and the separator peaks, and then it comes that from the pressure signal at the top of the riser, and that for the pressure difference signal at the top of the riser is the least satisfying one. As for the optimal differential pressure signals between the top of the riser and the separator, the results show that the recognition rate increases rapidly from 70.2% to 90.4% when the sample duration rising from 2.3 s to 18.6 s, and when the sample duration exceeds 74.4 s, the recognition rate exceeds 92.9% and remains unchanged.