Fast and simple space vector modulation method for multilevel converters

This study proposes a simplified space vector pulse-width modulation (SVPWM) method for multilevel converters. To avoid unnecessary coordination transformations, firstly, a further derivation is conducted on the basis of the 60° coordinate transformation. Then, all the nearest three vectors (NTVs), duty cycles and optimal switching sequence within one switching period can be identified through a simple comparison of three-phase modulation waves. To further reduce the switching frequency, detailed steps to achieve the minimum number of transitions among different NTVs are constructed. Combined with the optimal switching sequence within one switching period, the minimum number of transitions within a fundamental period can be achieved easily. Finally, a thorough discussion is conducted to simplify the procedure further and the flowchart for the proposed SVPWM is also presented. Compared with the previous methods, the proposed method does not require any iterative calculation or coordinate transformation. To the best of the authors' knowledge, the calculation amount is reduced by almost seven times compared with the methods proposed. In addition, the switching frequency and total harmonic distortions remain at the same level without any deterioration. Finally, the simulation and experiment for modular multilevel converter are performed to verify the correctness and efficiency of the proposed method.