Fabrication of three-dimensional electromagnetic band-gap structure with alumina based on stereolithography and gelcasting

Yawen Hu; Dichen Li; Wei Dai; Minjie Wang; Hong Wang; Kun Sun

doi:10.1016/j.jmsy.2011.05.001

Fabrication of three-dimensional electromagnetic band-gap structure with alumina based on stereolithography and gelcasting

Yawen Hu
, Dichen Li
, Wei Dai
, Minjie Wang
, Hong Wang
, Kun Sun

School of Mechanical Engineering

Xi'an Jiaotong University

Research output: Contribution to journal › Article › peer-review

8 Scopus citations

Abstract

The paper presents a manufacturing study of three-dimensional (3D) diamond electromagnetic band-gap (EBG) structures with a new manufacturing system. The EBG structures made from dielectric composites of alumina-slurry with 55 vol% Al ₂O ₃ powder were fabricated by means of a stereolithography (SL) and gelcasting system. The samples of the EBG structure of alumina-resin (before sintering) and that of alumina-air (after sintering) were investigated. The lattice constant was 12 mm, while the band-gap in the 〈110〉 direction appeared at 9.0012.00 GHz, which agreed fairly well with the simulation results based on the finite element method (FEM) in Ansoft HFSS.

Original language	English
Pages (from-to)	22-25
Number of pages	4
Journal	Journal of Manufacturing Systems
Volume	31
Issue number	1
DOIs	https://doi.org/10.1016/j.jmsy.2011.05.001
State	Published - Jan 2012

Access to Document

10.1016/j.jmsy.2011.05.001

Cite this

@article{f687647b73a242268866b0e776c5b9a3,

title = "Fabrication of three-dimensional electromagnetic band-gap structure with alumina based on stereolithography and gelcasting",

abstract = "The paper presents a manufacturing study of three-dimensional (3D) diamond electromagnetic band-gap (EBG) structures with a new manufacturing system. The EBG structures made from dielectric composites of alumina-slurry with 55 vol\% Al 2O 3 powder were fabricated by means of a stereolithography (SL) and gelcasting system. The samples of the EBG structure of alumina-resin (before sintering) and that of alumina-air (after sintering) were investigated. The lattice constant was 12 mm, while the band-gap in the 〈110〉 direction appeared at 9.0012.00 GHz, which agreed fairly well with the simulation results based on the finite element method (FEM) in Ansoft HFSS.",

author = "Yawen Hu and Dichen Li and Wei Dai and Minjie Wang and Hong Wang and Kun Sun",

year = "2012",

month = jan,

doi = "10.1016/j.jmsy.2011.05.001",

language = "英语",

volume = "31",

pages = "22--25",

journal = "Journal of Manufacturing Systems",

issn = "0278-6125",

publisher = "Elsevier B.V.",

number = "1",

}

TY - JOUR

T1 - Fabrication of three-dimensional electromagnetic band-gap structure with alumina based on stereolithography and gelcasting

AU - Hu, Yawen

AU - Li, Dichen

AU - Dai, Wei

AU - Wang, Minjie

AU - Wang, Hong

AU - Sun, Kun

PY - 2012/1

Y1 - 2012/1

N2 - The paper presents a manufacturing study of three-dimensional (3D) diamond electromagnetic band-gap (EBG) structures with a new manufacturing system. The EBG structures made from dielectric composites of alumina-slurry with 55 vol% Al 2O 3 powder were fabricated by means of a stereolithography (SL) and gelcasting system. The samples of the EBG structure of alumina-resin (before sintering) and that of alumina-air (after sintering) were investigated. The lattice constant was 12 mm, while the band-gap in the 〈110〉 direction appeared at 9.0012.00 GHz, which agreed fairly well with the simulation results based on the finite element method (FEM) in Ansoft HFSS.

AB - The paper presents a manufacturing study of three-dimensional (3D) diamond electromagnetic band-gap (EBG) structures with a new manufacturing system. The EBG structures made from dielectric composites of alumina-slurry with 55 vol% Al 2O 3 powder were fabricated by means of a stereolithography (SL) and gelcasting system. The samples of the EBG structure of alumina-resin (before sintering) and that of alumina-air (after sintering) were investigated. The lattice constant was 12 mm, while the band-gap in the 〈110〉 direction appeared at 9.0012.00 GHz, which agreed fairly well with the simulation results based on the finite element method (FEM) in Ansoft HFSS.

UR - https://www.scopus.com/pages/publications/84856351029

U2 - 10.1016/j.jmsy.2011.05.001

DO - 10.1016/j.jmsy.2011.05.001

M3 - 文章

AN - SCOPUS:84856351029

SN - 0278-6125

VL - 31

SP - 22

EP - 25

JO - Journal of Manufacturing Systems

JF - Journal of Manufacturing Systems

IS - 1

ER -

Fabrication of three-dimensional electromagnetic band-gap structure with alumina based on stereolithography and gelcasting

Abstract

Access to Document

Other files and links

Fingerprint

Cite this