Fabrication and characterisation of La0.8Sr0.2CrO3-ITO thermocouples for high-temperature sensing

Bohan Chen; Manguo Huang; Meiju Zhang; Xiaobo Liang; Dan Liu; Lingyan Wang; Gang Niu; Zhongkai Zhang; Bian Tian; Peng Shi; Wei Ren

doi:10.1504/IJNM.2022.130254

Fabrication and characterisation of La_0.8Sr_0.2CrO₃-ITO thermocouples for high-temperature sensing

Bohan Chen
, Manguo Huang
, Meiju Zhang
, Xiaobo Liang
, Dan Liu
, Lingyan Wang
, Gang Niu
, Zhongkai Zhang
, Bian Tian
, Peng Shi
, Wei Ren

Research output: Contribution to journal › Article › peer-review

Abstract

La_0.8Sr_0.2CrO₃-ITO thermocouples were successfully fabricated by screen printing. The La_0.8Sr_0.2CrO₃ powder used for screen printing was obtained by the sol-gel method. The highest thermal voltage output was maintained at 270 mV at 1270°C. The microstructure of La_0.8Sr_0.2CrO₃ and ITO electrode films were analysed by SEM. Thermoelectric response test was implemented to measure the performance of La_0.8Sr_0.2CrO₃-ITO thermocouple by three times of thermal cycles. The results indicated that La_0.8Sr_0.2CrO₃-ITO thermocouple showed good stability at high temperature.

Original language	English
Pages (from-to)	1-8
Number of pages	8
Journal	International Journal of Nanomanufacturing
Volume	18
Issue number	1
DOIs	https://doi.org/10.1504/IJNM.2022.130254
State	Published - 2022

Keywords

LaSrCrO-ITO thermocouple
screen printing
thermoelectric response

Access to Document

10.1504/IJNM.2022.130254

Cite this

@article{22683077f4ac404d9131ccbc6c1e84e1,

title = "Fabrication and characterisation of La0.8Sr0.2CrO3-ITO thermocouples for high-temperature sensing",

abstract = "La0.8Sr0.2CrO3-ITO thermocouples were successfully fabricated by screen printing. The La0.8Sr0.2CrO3 powder used for screen printing was obtained by the sol-gel method. The highest thermal voltage output was maintained at 270 mV at 1270°C. The microstructure of La0.8Sr0.2CrO3 and ITO electrode films were analysed by SEM. Thermoelectric response test was implemented to measure the performance of La0.8Sr0.2CrO3-ITO thermocouple by three times of thermal cycles. The results indicated that La0.8Sr0.2CrO3-ITO thermocouple showed good stability at high temperature.",

keywords = "LaSrCrO-ITO thermocouple, screen printing, thermoelectric response",

author = "Bohan Chen and Manguo Huang and Meiju Zhang and Xiaobo Liang and Dan Liu and Lingyan Wang and Gang Niu and Zhongkai Zhang and Bian Tian and Peng Shi and Wei Ren",

note = "Publisher Copyright: Copyright {\textcopyright} 2022 Inderscience Enterprises Ltd.",

year = "2022",

doi = "10.1504/IJNM.2022.130254",

language = "英语",

volume = "18",

pages = "1--8",

journal = "International Journal of Nanomanufacturing",

issn = "1746-9392",

publisher = "Inderscience Enterprises Ltd",

number = "1",

}

TY - JOUR

T1 - Fabrication and characterisation of La0.8Sr0.2CrO3-ITO thermocouples for high-temperature sensing

AU - Chen, Bohan

AU - Huang, Manguo

AU - Zhang, Meiju

AU - Liang, Xiaobo

AU - Liu, Dan

AU - Wang, Lingyan

AU - Niu, Gang

AU - Zhang, Zhongkai

AU - Tian, Bian

AU - Shi, Peng

AU - Ren, Wei

PY - 2022

Y1 - 2022

N2 - La0.8Sr0.2CrO3-ITO thermocouples were successfully fabricated by screen printing. The La0.8Sr0.2CrO3 powder used for screen printing was obtained by the sol-gel method. The highest thermal voltage output was maintained at 270 mV at 1270°C. The microstructure of La0.8Sr0.2CrO3 and ITO electrode films were analysed by SEM. Thermoelectric response test was implemented to measure the performance of La0.8Sr0.2CrO3-ITO thermocouple by three times of thermal cycles. The results indicated that La0.8Sr0.2CrO3-ITO thermocouple showed good stability at high temperature.

AB - La0.8Sr0.2CrO3-ITO thermocouples were successfully fabricated by screen printing. The La0.8Sr0.2CrO3 powder used for screen printing was obtained by the sol-gel method. The highest thermal voltage output was maintained at 270 mV at 1270°C. The microstructure of La0.8Sr0.2CrO3 and ITO electrode films were analysed by SEM. Thermoelectric response test was implemented to measure the performance of La0.8Sr0.2CrO3-ITO thermocouple by three times of thermal cycles. The results indicated that La0.8Sr0.2CrO3-ITO thermocouple showed good stability at high temperature.

KW - LaSrCrO-ITO thermocouple

KW - screen printing

KW - thermoelectric response

UR - https://www.scopus.com/pages/publications/85162126073

U2 - 10.1504/IJNM.2022.130254

DO - 10.1504/IJNM.2022.130254

M3 - 文章

AN - SCOPUS:85162126073

SN - 1746-9392

VL - 18

SP - 1

EP - 8

JO - International Journal of Nanomanufacturing

JF - International Journal of Nanomanufacturing

IS - 1

ER -

Fabrication and characterisation of La_0.8Sr_0.2CrO₃-ITO thermocouples for high-temperature sensing

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this