Skip to main navigation Skip to search Skip to main content

Explosion symmetry improvement of polyimide-coated tungsten wire in vacuum on negative discharge facility

  • Mo Li
  • , Jian Wu
  • , Yihan Lu
  • , Xingwen Li
  • , Yang Li
  • , Mengtong Qiu
  • Xi'an Jiaotong University
  • Northwest Institute of Nuclear Technology

Research output: Contribution to journal › Article › peer-review

4 Scopus citations

Abstract

Tungsten wire explosion is very asymmetric when fast current rate and insulated coatings are both applied on negative discharge facility using a 24-mm-diameter cathode geometry, which is commonly used on mega-ampere facilities. It is inferred, based on an analytical treatment of the guiding center drift and COMSOL simulations, that the large negative radial electric field causes early voltage breakdown and terminates energy deposition into the wire core on the anode side of the wire. After the anode side is short circuited, the radial electric field along the wire surface on the cathode side will change its polarity and thus leading to additional energy deposition into the wire core. This change causes ∼10 times larger energy deposition and ∼14 times faster explosion velocity in the cathode side than the anode side. In order to reduce this asymmetry, a hollow cylindrical cathode geometry was used to reverse the polarity of radial electric field and was optimized to use on multi-MA facilities. In this case, fully vaporized polyimide-coated tungsten wire with great symmetry improvement was achieved with energy deposition of ∼8.8 eV/atom. The atomic and electronic density distributions for the two different load geometries were obtained by the double-wavelength measurement.

Original languageEnglish
Article number012705
JournalPhysics of Plasmas
Volume25
Issue number1
DOIs
StatePublished - 1 Jan 2018

Fingerprint

Dive into the research topics of 'Explosion symmetry improvement of polyimide-coated tungsten wire in vacuum on negative discharge facility'. Together they form a unique fingerprint.

Cite this