Experimental study on the characteristics of a closed loop R134-a spray cooling

Yu Hou; Jionghui Liu; Xuemei Su; Yang Qian; Liqiang Liu; Xiufang Liu

doi:10.1016/j.expthermflusci.2014.10.026

Experimental study on the characteristics of a closed loop R134-a spray cooling

Yu Hou
, Jionghui Liu
, Xuemei Su
, Yang Qian
, Liqiang Liu
, Xiufang Liu

School of Energy and Power Engineering

Xi'an Jiaotong University
CAS - Technical Institute of Physics and Chemistry

Research output: Contribution to journal › Article › peer-review

61 Scopus citations

Abstract

Experimental investigation on the R134-a spray cooling characteristics is presented in a closed loop system. A full-cone nozzle was applied to spray onto a heated circular copper plate. The characteristics of the R134-a spray cooling under a series of different volumetric flow rate were obtained. The results shown that volumetric flow rate improves the critical heat flux (CHF). And larger volumetric flow rate prevent the dry-out phenomenon under high heat flux. However, volumetric flow rate bring the adverse condition that reduces the system efficiency. The maximum CHF of 117.2Wcm^-2 was achieved with 319K target surface temperature at 0.356Lmin^-1. The results indicate that R134-a owns a great cooling characteristics in spray cooling system.

Original language	English
Pages (from-to)	194-200
Number of pages	7
Journal	Experimental Thermal and Fluid Science
Volume	61
DOIs	https://doi.org/10.1016/j.expthermflusci.2014.10.026
State	Published - 1 Feb 2015

Keywords

Closed loop
Critical heat flux
Heat transfer
Spray cooling

Access to Document

10.1016/j.expthermflusci.2014.10.026

Cite this

@article{e3888a5c2f8645c9a8ddf3e9d52f8fdc,

title = "Experimental study on the characteristics of a closed loop R134-a spray cooling",

abstract = "Experimental investigation on the R134-a spray cooling characteristics is presented in a closed loop system. A full-cone nozzle was applied to spray onto a heated circular copper plate. The characteristics of the R134-a spray cooling under a series of different volumetric flow rate were obtained. The results shown that volumetric flow rate improves the critical heat flux (CHF). And larger volumetric flow rate prevent the dry-out phenomenon under high heat flux. However, volumetric flow rate bring the adverse condition that reduces the system efficiency. The maximum CHF of 117.2Wcm-2 was achieved with 319K target surface temperature at 0.356Lmin-1. The results indicate that R134-a owns a great cooling characteristics in spray cooling system.",

keywords = "Closed loop, Critical heat flux, Heat transfer, Spray cooling",

author = "Yu Hou and Jionghui Liu and Xuemei Su and Yang Qian and Liqiang Liu and Xiufang Liu",

note = "Publisher Copyright: {\textcopyright} 2014 Elsevier Inc.",

year = "2015",

month = feb,

day = "1",

doi = "10.1016/j.expthermflusci.2014.10.026",

language = "英语",

volume = "61",

pages = "194--200",

journal = "Experimental Thermal and Fluid Science",

issn = "0894-1777",

publisher = "Elsevier Inc.",

}

TY - JOUR

T1 - Experimental study on the characteristics of a closed loop R134-a spray cooling

AU - Hou, Yu

AU - Liu, Jionghui

AU - Su, Xuemei

AU - Qian, Yang

AU - Liu, Liqiang

AU - Liu, Xiufang

PY - 2015/2/1

Y1 - 2015/2/1

N2 - Experimental investigation on the R134-a spray cooling characteristics is presented in a closed loop system. A full-cone nozzle was applied to spray onto a heated circular copper plate. The characteristics of the R134-a spray cooling under a series of different volumetric flow rate were obtained. The results shown that volumetric flow rate improves the critical heat flux (CHF). And larger volumetric flow rate prevent the dry-out phenomenon under high heat flux. However, volumetric flow rate bring the adverse condition that reduces the system efficiency. The maximum CHF of 117.2Wcm-2 was achieved with 319K target surface temperature at 0.356Lmin-1. The results indicate that R134-a owns a great cooling characteristics in spray cooling system.

AB - Experimental investigation on the R134-a spray cooling characteristics is presented in a closed loop system. A full-cone nozzle was applied to spray onto a heated circular copper plate. The characteristics of the R134-a spray cooling under a series of different volumetric flow rate were obtained. The results shown that volumetric flow rate improves the critical heat flux (CHF). And larger volumetric flow rate prevent the dry-out phenomenon under high heat flux. However, volumetric flow rate bring the adverse condition that reduces the system efficiency. The maximum CHF of 117.2Wcm-2 was achieved with 319K target surface temperature at 0.356Lmin-1. The results indicate that R134-a owns a great cooling characteristics in spray cooling system.

KW - Closed loop

KW - Critical heat flux

KW - Heat transfer

KW - Spray cooling

UR - https://www.scopus.com/pages/publications/84911369299

U2 - 10.1016/j.expthermflusci.2014.10.026

DO - 10.1016/j.expthermflusci.2014.10.026

M3 - 文章

AN - SCOPUS:84911369299

SN - 0894-1777

VL - 61

SP - 194

EP - 200

JO - Experimental Thermal and Fluid Science

JF - Experimental Thermal and Fluid Science

ER -

Experimental study on the characteristics of a closed loop R134-a spray cooling

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this