Skip to main navigation Skip to search Skip to main content

Experimental investigation to natural convective heat transfer in wire-woven bulk Kagome truss

  • Xiaohu Yang
  • , Jiaxi Bai
  • , Tianjian Lu
  • , Tongbeum Kim
  • , Ki Ju Kang
  • Xi'an Jiaotong University
  • University of the Witwatersrand
  • Chonnam National University

Research output: Contribution to journal › Article › peer-review

Abstract

Natural convection on a novel periodic lattice frame material wire-woven bulk Kagome-sintered plate (WBK) at different inclination angles is experimentally investigated, and overall heat transfer performance is evaluated by the total thermal resistance concerning the effects of orientations (o-a, o-b, and o-c) and inclination angles covering 0° (horizontal orientation), 15°, 30°, 45°, 60°, 75°, and 90° (vertical orientation). The optimal inclination angle is found to approach 50°, corresponding to the minimum thermal resistance at a heat flux of 1150 W/m2. The average thermal resistance for WBK specimens gets 42% that of the smooth plate in the Rayleigh number range of 6.1×107-2.2×108. The heat transfer performance (thermal resistance) of WBK sample is different in three orientations due to its strong anisotropic topology: o-b orientation has smallest thermal resistance, but o-a orientation has the biggest one. Moderate blockage ratio results in relatively high flow mixing but acceptable flow resistance, ultimately leading to enhancing natural convective heat transfer.

Original languageEnglish
Pages (from-to)12-16
Number of pages5
JournalHsi-An Chiao Tung Ta Hsueh/Journal of Xi'an Jiaotong University
Volume48
Issue number7
DOIs
StatePublished - Jul 2014

Keywords

  • Anisotropy
  • Inclination angle
  • Natural convection
  • Wire-woven bulk Kagome

Fingerprint

Dive into the research topics of 'Experimental investigation to natural convective heat transfer in wire-woven bulk Kagome truss'. Together they form a unique fingerprint.

Cite this