Engineering Design and Primary Experiment Study of a 2.6-MV Field-Distortion Oil Switch

Yixiang Hu; Hao Wei; Ai'ci Qiu; Jiangtao Zeng; Fengju Sun; Peitian Cong; Xinjun Zhang; Weibo Yao; Shi Yang

doi:10.1109/TDEI.2016.006121

Engineering Design and Primary Experiment Study of a 2.6-MV Field-Distortion Oil Switch

Yixiang Hu
, Hao Wei
, Ai'ci Qiu
, Jiangtao Zeng
, Fengju Sun
, Peitian Cong
, Xinjun Zhang
, Weibo Yao
, Shi Yang

School of Electrical Engineering

Xi'an Jiaotong University
Northwest Institute of Nuclear Technology

Research output: Contribution to journal › Article › peer-review

Abstract

A 2.6-MV field-distortion oil switch was developed and tested. Engineering design theories of this switch, including electrode areas, oil anode-cathode (A-K) gaps, insulator-surface electric field, and A-K gaps of the pre-gas switch, were described in detail. Structure designs of the switch were presented. Electric-field distributions of the oil A-K gap and insulator surface were analyzed and discussed. Also, switch breakdown processes were estimated. Finally, performances of this switch were tested on the "JianGuang-I" facility (2.3MV/350ns). Preliminary experiment results show that with a 250kV trigger voltage, the switch-breakdown time delay is about 132ns and its jitter (the standard deviation) is less than 4.4ns.

Original language	English
Article number	006121
Pages (from-to)	1978-1984
Number of pages	7
Journal	IEEE Transactions on Dielectrics and Electrical Insulation
Volume	24
Issue number	4
DOIs	https://doi.org/10.1109/TDEI.2016.006121
State	Published - 2017

Keywords

Electric field effects
High-voltage techniques
Jitter
Oil insulation
Time-delay arrays

Access to Document

10.1109/TDEI.2016.006121

Cite this

@article{5854e715889846f7a672e462b5989559,

title = "Engineering Design and Primary Experiment Study of a 2.6-MV Field-Distortion Oil Switch",

abstract = "A 2.6-MV field-distortion oil switch was developed and tested. Engineering design theories of this switch, including electrode areas, oil anode-cathode (A-K) gaps, insulator-surface electric field, and A-K gaps of the pre-gas switch, were described in detail. Structure designs of the switch were presented. Electric-field distributions of the oil A-K gap and insulator surface were analyzed and discussed. Also, switch breakdown processes were estimated. Finally, performances of this switch were tested on the {"}JianGuang-I{"} facility (2.3MV/350ns). Preliminary experiment results show that with a 250kV trigger voltage, the switch-breakdown time delay is about 132ns and its jitter (the standard deviation) is less than 4.4ns.",

keywords = "Electric field effects, High-voltage techniques, Jitter, Oil insulation, Time-delay arrays",

author = "Yixiang Hu and Hao Wei and Ai'ci Qiu and Jiangtao Zeng and Fengju Sun and Peitian Cong and Xinjun Zhang and Weibo Yao and Shi Yang",

year = "2017",

doi = "10.1109/TDEI.2016.006121",

language = "英语",

volume = "24",

pages = "1978--1984",

journal = "IEEE Transactions on Dielectrics and Electrical Insulation",

issn = "1070-9878",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

number = "4",

}

TY - JOUR

T1 - Engineering Design and Primary Experiment Study of a 2.6-MV Field-Distortion Oil Switch

AU - Hu, Yixiang

AU - Wei, Hao

AU - Qiu, Ai'ci

AU - Zeng, Jiangtao

AU - Sun, Fengju

AU - Cong, Peitian

AU - Zhang, Xinjun

AU - Yao, Weibo

AU - Yang, Shi

PY - 2017

Y1 - 2017

N2 - A 2.6-MV field-distortion oil switch was developed and tested. Engineering design theories of this switch, including electrode areas, oil anode-cathode (A-K) gaps, insulator-surface electric field, and A-K gaps of the pre-gas switch, were described in detail. Structure designs of the switch were presented. Electric-field distributions of the oil A-K gap and insulator surface were analyzed and discussed. Also, switch breakdown processes were estimated. Finally, performances of this switch were tested on the "JianGuang-I" facility (2.3MV/350ns). Preliminary experiment results show that with a 250kV trigger voltage, the switch-breakdown time delay is about 132ns and its jitter (the standard deviation) is less than 4.4ns.

AB - A 2.6-MV field-distortion oil switch was developed and tested. Engineering design theories of this switch, including electrode areas, oil anode-cathode (A-K) gaps, insulator-surface electric field, and A-K gaps of the pre-gas switch, were described in detail. Structure designs of the switch were presented. Electric-field distributions of the oil A-K gap and insulator surface were analyzed and discussed. Also, switch breakdown processes were estimated. Finally, performances of this switch were tested on the "JianGuang-I" facility (2.3MV/350ns). Preliminary experiment results show that with a 250kV trigger voltage, the switch-breakdown time delay is about 132ns and its jitter (the standard deviation) is less than 4.4ns.

KW - Electric field effects

KW - High-voltage techniques

KW - Jitter

KW - Oil insulation

KW - Time-delay arrays

UR - https://www.scopus.com/pages/publications/85029800332

U2 - 10.1109/TDEI.2016.006121

DO - 10.1109/TDEI.2016.006121

M3 - 文章

AN - SCOPUS:85029800332

SN - 1070-9878

VL - 24

SP - 1978

EP - 1984

JO - IEEE Transactions on Dielectrics and Electrical Insulation

JF - IEEE Transactions on Dielectrics and Electrical Insulation

IS - 4

M1 - 006121

ER -

Engineering Design and Primary Experiment Study of a 2.6-MV Field-Distortion Oil Switch

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this