Energy saving from furnace slag: Study on centrifugal granulation characteristics of the rotating cup

Xi Zhang; Shuzhong Wang; Jun Zhao; Liwei Ma; Pengfei Yu; Zhiqiang Wu; Haiyu Meng

doi:10.1016/j.egypro.2019.01.725

Energy saving from furnace slag: Study on centrifugal granulation characteristics of the rotating cup

Xi Zhang
, Shuzhong Wang
, Jun Zhao
, Liwei Ma
, Pengfei Yu
, Zhiqiang Wu
, Haiyu Meng

Research output: Contribution to journal › Conference article › peer-review

7 Scopus citations

Abstract

Dry centrifugal granulation technology is an important mean for liquid high-temperature slag. In this paper, the numerical simulation of dry granulation process was carried out to analyze the stretching and splitting process of liquid filaments and study the effects of various factors on liquid filaments and granulated droplets. The results showed that when rotating speed was higher than 1100 rpm, the granulation mode transitioned from sheet mode to ligament mode. When rotating speed reached 3000 rpm, it entered droplet mode. When rotating speed increased, the droplet diameter decreased and the distribution concentration increased. The ratio of the liquid filament diameter to the droplet diameter was approximately 0.7. The increase of the viscosity increased the filament length and the average droplet diameter. Moreover, the increase of the surface tension also increased the average droplet diameter. When the inclination angle of the cup was 45°, the granulated droplets diameter obtained was small.

Original language	English
Pages (from-to)	4753-4758
Number of pages	6
Journal	Energy Procedia
Volume	158
DOIs	https://doi.org/10.1016/j.egypro.2019.01.725
State	Published - 2019
Event	10th International Conference on Applied Energy, ICAE 2018 - Hong Kong, China Duration: 22 Aug 2018 → 25 Aug 2018

Keywords

Droplets
Dry centrifugal granulation
Energy saving
Liquid filaments

Access to Document

10.1016/j.egypro.2019.01.725

Cite this

@article{9451069aa55448d48e90f7a8271ce283,

title = "Energy saving from furnace slag: Study on centrifugal granulation characteristics of the rotating cup",

abstract = "Dry centrifugal granulation technology is an important mean for liquid high-temperature slag. In this paper, the numerical simulation of dry granulation process was carried out to analyze the stretching and splitting process of liquid filaments and study the effects of various factors on liquid filaments and granulated droplets. The results showed that when rotating speed was higher than 1100 rpm, the granulation mode transitioned from sheet mode to ligament mode. When rotating speed reached 3000 rpm, it entered droplet mode. When rotating speed increased, the droplet diameter decreased and the distribution concentration increased. The ratio of the liquid filament diameter to the droplet diameter was approximately 0.7. The increase of the viscosity increased the filament length and the average droplet diameter. Moreover, the increase of the surface tension also increased the average droplet diameter. When the inclination angle of the cup was 45°, the granulated droplets diameter obtained was small.",

keywords = "Droplets, Dry centrifugal granulation, Energy saving, Liquid filaments",

author = "Xi Zhang and Shuzhong Wang and Jun Zhao and Liwei Ma and Pengfei Yu and Zhiqiang Wu and Haiyu Meng",

note = "Publisher Copyright: {\textcopyright} 2019 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/) Peer-review under responsibility of the scientific committee of ICAE2018 - The 10th International Conference on Applied Energy.; 10th International Conference on Applied Energy, ICAE 2018 ; Conference date: 22-08-2018 Through 25-08-2018",

year = "2019",

doi = "10.1016/j.egypro.2019.01.725",

language = "英语",

volume = "158",

pages = "4753--4758",

journal = "Energy Procedia",

issn = "1876-6102",

publisher = "Elsevier Ltd",

}

TY - JOUR

T1 - Energy saving from furnace slag

T2 - 10th International Conference on Applied Energy, ICAE 2018

AU - Zhang, Xi

AU - Wang, Shuzhong

AU - Zhao, Jun

AU - Ma, Liwei

AU - Yu, Pengfei

AU - Wu, Zhiqiang

AU - Meng, Haiyu

N1 - Publisher Copyright: © 2019 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/) Peer-review under responsibility of the scientific committee of ICAE2018 - The 10th International Conference on Applied Energy.

PY - 2019

Y1 - 2019

N2 - Dry centrifugal granulation technology is an important mean for liquid high-temperature slag. In this paper, the numerical simulation of dry granulation process was carried out to analyze the stretching and splitting process of liquid filaments and study the effects of various factors on liquid filaments and granulated droplets. The results showed that when rotating speed was higher than 1100 rpm, the granulation mode transitioned from sheet mode to ligament mode. When rotating speed reached 3000 rpm, it entered droplet mode. When rotating speed increased, the droplet diameter decreased and the distribution concentration increased. The ratio of the liquid filament diameter to the droplet diameter was approximately 0.7. The increase of the viscosity increased the filament length and the average droplet diameter. Moreover, the increase of the surface tension also increased the average droplet diameter. When the inclination angle of the cup was 45°, the granulated droplets diameter obtained was small.

AB - Dry centrifugal granulation technology is an important mean for liquid high-temperature slag. In this paper, the numerical simulation of dry granulation process was carried out to analyze the stretching and splitting process of liquid filaments and study the effects of various factors on liquid filaments and granulated droplets. The results showed that when rotating speed was higher than 1100 rpm, the granulation mode transitioned from sheet mode to ligament mode. When rotating speed reached 3000 rpm, it entered droplet mode. When rotating speed increased, the droplet diameter decreased and the distribution concentration increased. The ratio of the liquid filament diameter to the droplet diameter was approximately 0.7. The increase of the viscosity increased the filament length and the average droplet diameter. Moreover, the increase of the surface tension also increased the average droplet diameter. When the inclination angle of the cup was 45°, the granulated droplets diameter obtained was small.

KW - Droplets

KW - Dry centrifugal granulation

KW - Energy saving

KW - Liquid filaments

UR - https://www.scopus.com/pages/publications/85063873054

U2 - 10.1016/j.egypro.2019.01.725

DO - 10.1016/j.egypro.2019.01.725

M3 - 会议文章

AN - SCOPUS:85063873054

SN - 1876-6102

VL - 158

SP - 4753

EP - 4758

JO - Energy Procedia

JF - Energy Procedia

Y2 - 22 August 2018 through 25 August 2018

ER -

Energy saving from furnace slag: Study on centrifugal granulation characteristics of the rotating cup

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this