Skip to main navigation Skip to search Skip to main content

Effects of ignition timing on methanol spray combustion in a lean cracked-syngas/air premixed atmosphere

  • Xi'an Jiaotong University

Research output: Contribution to journal › Article › peer-review

Abstract

To clarify the role of ignition timing in spray–premixed coupled combustion, methanol spray combustion in a lean premixed syngas/air background was experimentally investigated in a constant-volume combustion bomb. Because methanol is difficult to ignite directly in lean air due to its high latent heat of vaporization and limited reactivity at the early stage of combustion, highly reactive methanol-cracked syngas was introduced as an ignition-supporting background. High-speed schlieren imaging, pressure measurements, and CH* chemiluminescence were employed to characterize flame evolution, pressure response, and combustion mode transition. The results show that, under synchronous ignition with injection, flame development is strongly governed by spray penetration and wall-impingement-induced spreading. The flame expands rapidly at the early stage and is accompanied by a faster pressure rise. A distinct staged combustion behavior is observed because the ignition kernel is established in a locally fuel-rich and highly reactive region, followed by a shift of combustion toward relatively leaner surrounding mixtures after rapid consumption of the initial high-reactivity zone. As the ignition timing is delayed, the flame gradually changes from a spray-dominated non-homogeneous mode to a more premixed-like mode, and the staged feature in the pressure trace becomes weaker. CH* chemiluminescence further shows that methanol-related reactions are much stronger and more spatially concentrated when ignition occurs close to injection, whereas delayed ignition markedly weakens the CH* signal and leads to a more spatially distributed reaction zone. When the ignition delay is increased to 20 ms after injection, the spray combustion efficiency increases from 65.3 % to 92.2 %, while the wall heat-loss fraction decreases from 2.65 % to 0.61 %.

Original languageEnglish
Article number141717
JournalFuel
Volume431
DOIs
StatePublished - Mar 2027

Keywords

  • Ignition timing
  • Lean combustion
  • Methanol
  • Spray combustion

Fingerprint

Dive into the research topics of 'Effects of ignition timing on methanol spray combustion in a lean cracked-syngas/air premixed atmosphere'. Together they form a unique fingerprint.

Cite this