TY - GEN
T1 - Effect on dielectric properties of LDPE due to addition of different structure of BiFeO3 powders
AU - Hua, Yu
AU - Song, Wei
AU - Sun, Zhi
AU - Zhang, Dong
AU - Han, Bai
AU - Wang, Xuan
AU - Lei, Qingquan
N1 - Publisher Copyright:
© 2018 IEEE.
PY - 2018/6/29
Y1 - 2018/6/29
N2 - Lamellar and spherical BiFeO3 powders were synthesized by the hydrothermal route. The morphology feature of BiFeO3 powders was shown using scanning electron microscope. The SEM images of the lamellar BiFeO3 powders shows the lamellar size was 1-2 μm and thickness was about 100 nm. Each crystal structure were formed of multilayer aggregate. The images of the spherical BiFeO3 powders shows uniform feature with approximately 2 μm in size. Dielectric BiFeO3/LDPE composite with doping lamellar and spherical BiFeO3 powders of different percentages including 0.2, 0.5, 1 and 2 wt%, have been successfully prepared by melt blending route. In this work, we studies AC breakdown strength and dielectric spectrum of BiFeO3/LDPE composite. The AC breakdown strength of LDPE was increased due to addition of lamellar and spherical BiFeO3 powders of 0.2, 0.5, 1 and 2 wt%. The AC breakdown strength of BiFeO3/LDPE firstly increased and then decreased with the increasing of BiFeO3 content. The AC breakdown strength of lamellar-BiFeO3/LDPE composite is higher than of spherical-BiFeO3/LDPE. The dielectric property of BiFeO3/LDPE composite was investigated. The relative permittivity of BiFeO3/LDPE composite is greater than LDPE and firstly decreased then increased with the increasing of doping BiFeO3 content. The relative permittivity of lamellar-BiFeO3/LDPE composite is smaller than the spherica-BiFeO3/LDPE composite under the same conditions.
AB - Lamellar and spherical BiFeO3 powders were synthesized by the hydrothermal route. The morphology feature of BiFeO3 powders was shown using scanning electron microscope. The SEM images of the lamellar BiFeO3 powders shows the lamellar size was 1-2 μm and thickness was about 100 nm. Each crystal structure were formed of multilayer aggregate. The images of the spherical BiFeO3 powders shows uniform feature with approximately 2 μm in size. Dielectric BiFeO3/LDPE composite with doping lamellar and spherical BiFeO3 powders of different percentages including 0.2, 0.5, 1 and 2 wt%, have been successfully prepared by melt blending route. In this work, we studies AC breakdown strength and dielectric spectrum of BiFeO3/LDPE composite. The AC breakdown strength of LDPE was increased due to addition of lamellar and spherical BiFeO3 powders of 0.2, 0.5, 1 and 2 wt%. The AC breakdown strength of BiFeO3/LDPE firstly increased and then decreased with the increasing of BiFeO3 content. The AC breakdown strength of lamellar-BiFeO3/LDPE composite is higher than of spherical-BiFeO3/LDPE. The dielectric property of BiFeO3/LDPE composite was investigated. The relative permittivity of BiFeO3/LDPE composite is greater than LDPE and firstly decreased then increased with the increasing of doping BiFeO3 content. The relative permittivity of lamellar-BiFeO3/LDPE composite is smaller than the spherica-BiFeO3/LDPE composite under the same conditions.
KW - AC breakdown strength
KW - BiFeO/LDPE
KW - composite
KW - relative permittivity
UR - https://www.scopus.com/pages/publications/85049846038
U2 - 10.1109/ICPADM.2018.8401212
DO - 10.1109/ICPADM.2018.8401212
M3 - 会议稿件
AN - SCOPUS:85049846038
T3 - Proceedings of the IEEE International Conference on Properties and Applications of Dielectric Materials
SP - 918
EP - 920
BT - ICPADM 2018 - 12th International Conference on the Properties and Applications of Dielectric Materials
PB - Institute of Electrical and Electronics Engineers Inc.
T2 - 12th International Conference on the Properties and Applications of Dielectric Materials, ICPADM 2018
Y2 - 20 May 2018 through 24 May 2018
ER -