Effect of Ta2O5 in (Ca, Si, Ta)-doped TiO2 ceramic varistors

Research output: Contribution to journalArticlepeer-review

41 Scopus citations

Abstract

TiO2 varistors doped with 0.2 mol% Ca, 0.4 mol% Si and different concentrations of Ta were obtained by ceramic sintering processing at 1350 °C. The effect of Ta on the microstructures, nonlinear electrical behavior and dielectric properties of the (Ca, Si, Ta)-doped TiO2 ceramics were investigated. The ceramics have nonlinear coefficients of α = 3.0-5.0 and ultrahigh relative dielectric constants which is up to 104. Experimental evidence shows that small quantities of Ta2O5 improve the nonlinear properties of the samples significantly. It was found that an optimal doping composition of 0.8 mol% Ta2O5 leads to a low breakdown voltage of 14.7 V/mm, a high nonlinear constant of 4.8 and an ultrahigh electrical permittivity of 5.0 × 104 and tg δ = 0.66 (measured at 1 kHz), which is consistent with the highest and narrowest grain boundary barriers of the ceramics. In view of these electrical characteristics, the TiO2-0.8 mol% Ta2O5 ceramic is a viable candidate for capacitor-varistor functional devices. The characteristics of the ceramics can be explained by the effect and the maximum of the substitution of Ta5+ for Ti4+.

Original languageEnglish
Pages (from-to)1345-1347
Number of pages3
JournalCeramics International
Volume34
Issue number5
DOIs
StatePublished - Jul 2008

Keywords

  • Electrical property
  • Microstructure
  • Tantalum oxide
  • TiO varistor

Fingerprint

Dive into the research topics of 'Effect of Ta2O5 in (Ca, Si, Ta)-doped TiO2 ceramic varistors'. Together they form a unique fingerprint.

Cite this