Skip to main navigation Skip to search Skip to main content

Effect of pyrolysis upgrading temperature on particulate matter emissions from lignite semi-char combustion

  • Xuebin Wang
  • , Jiaye Zhang
  • , Shengjie Bai
  • , Lan Zhang
  • , Yan Li
  • , Hrvoje Mikulčić
  • , Juan Chen
  • , Liang Wang
  • , Houzhang Tan
  • Xi'an Jiaotong University
  • Henan Province Boiler Pressure Vessel Safety Inspection Institute
  • University of Zagreb
  • SINTEF

Research output: Contribution to journalArticlepeer-review

28 Scopus citations

Abstract

Low-temperature pyrolysis is one of the most promising methods for lignite upgrading and staged utilization, however, its effect on particulate matter emissions from the combustion of upgrad lignite has not been reported before. In this paper, Xilin Gol lignite was pyrolyzed in a fixed-bed reactor at 250–550 °C, the produced semi-char was characterized, and then burned in a drop tube furnace at 1300 °C. Particulate matter emissions from lignite semi-char combustion are collected and measured passing through a 13-stage impactor. Results show that the particulate matter emissions of lignite combustion can be significantly affected through the change of fuel properties by low-temperature pyrolysis upgrading. In the studied pyrolysis temperature range, the most drastic devolatilization, fragmentation, porous structure development, and removal of reactive functional group occur at about 350 °C, when the produced semi-char has the highest combustion reactivity. With the increase of pyrolysis temperature, both emissions of particulate matter <0.5 μm and particulate matter in the range of 0.5–10 μm first decrease and then increase. Pyrolysis upgrading significantly reduces the emissions of particulate matter <0.5 μm from lignite combustion, and the combustion of semi-char produced at 350 °C has the lowest emissions of particulate matter <0.5 μm. The lowest emissions of particulate matter in the range of 0.5–10 μm are obtained from the combustion of semi-char produced at 250 °C. In particulate matter emissions from semi-char combustion, the ultrafine particles <100 nm are rich in sulfur, magnesium, sodium, phosphorus and ferrum while the coarse ones are rich in silicon and aluminum. The influencing mechanism of pyrolysis temperature on particulate matter emissions is complicated and includes many factors, requiring further study. This study indicates that low-temperature pyrolysis upgrading is efficient to control particulate matter emissions from lignite combustion.

Original languageEnglish
Pages (from-to)384-391
Number of pages8
JournalEnergy Conversion and Management
Volume195
DOIs
StatePublished - 1 Sep 2019

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 7 - Affordable and Clean Energy
    SDG 7 Affordable and Clean Energy

Keywords

  • Combustion
  • Lignite upgrading
  • Particulate matter
  • Pyrolysis
  • Semi-char

Fingerprint

Dive into the research topics of 'Effect of pyrolysis upgrading temperature on particulate matter emissions from lignite semi-char combustion'. Together they form a unique fingerprint.

Cite this