Skip to main navigation Skip to search Skip to main content

Effect of impregnating and heat treatment on microstructure and properties of pressureless sintering AlN/h-BN composite ceramics

  • Xi'an Jiaotong University

Research output: Contribution to journal › Article › peer-review

1 Scopus citations

Abstract

AlN/20% (volume fraction)h-BN composites were fabricated by pressureless sintering at 1700°C for 2 h. The samples were respectively impregnated into two impregnants of A10 alumina sol and silica sol/phenolic, and then heat-treated at 1450°C for 2 h in nitrogen atmosphere. The relative density, Vickers hardness, flexural strength, microstructure, and phase composition of the ceramics before and after impregnated and heat treated were investigated, and the strengthen mechanism of the composite ceramics was analyzed. The results showed that the Vickers hardness and flexural strength of the samples dipped by the silica sol/phenolic increased significantly, the flexural strength of AlN/20%h-BN increased from 81.5 MPa to 130.1 MPa and the Vickers hardness increased from 1.99 GPa to 3.58 GPa, while the samples dipped by the A10 alumina sol improved slightly. The SiC and aluminum oxynitride were formed homogenously in the pores with the silica sol/phenolic treated samples, which is the main reason to improve the mechanical properties of the samples.

Original languageEnglish
Pages (from-to)796-799
Number of pages4
JournalKuei Suan Jen Hsueh Pao/ Journal of the Chinese Ceramic Society
Volume40
Issue number6
StatePublished - Jun 2012

Keywords

  • Alumina sol
  • Aluminum nitride
  • Heat treatment
  • Hexagonal boron nitride
  • Impregnate
  • Phenolic
  • Silica sol

Fingerprint

Dive into the research topics of 'Effect of impregnating and heat treatment on microstructure and properties of pressureless sintering AlN/h-BN composite ceramics'. Together they form a unique fingerprint.

Cite this