Direct numerical simulation of turbulent flow and heat transfer in a square duct with natural convection

Research output: Contribution to journalArticlepeer-review

8 Scopus citations

Abstract

In this paper, a direct numerical simulation of a fully developed turbulent flow and heat transfer are studied in a square duct with an imposed temperature difference between the vertical walls and the perfectly insulated horizontal walls. The natural convection is considered on the cross section in the duct. The numerical scheme employs a time-splitting method to integrate the three dimensional incompressible Navier-Stokes equation. The unsteady flow field was simulated at a Reynolds number of 400 based on the Mean friction velocity and the hydraulic diameter (Re m = 6200), while the Prandtl number (Pr) is assumed 0.71. Four different Grashof numbers (Gr = 104, 10 5, 106 and 107) are considered. The results show that the secondary flow and turbulent characteristics are not affected obviously at lower Grashof number (Gr ≤ 105) cases, while for the higher Grashof number cases, natural convection has an important effect, but the mean flow and mean temperature at the cross section are also affected strongly by Reynolds stresses. Compared with the laminar heat transfer at the same Grashof number, the intensity of the combined heat transfer is somewhat decreased.

Original languageEnglish
Pages (from-to)229-250
Number of pages22
JournalHeat and Mass Transfer/Waerme- und Stoffuebertragung
Volume44
Issue number2
DOIs
StatePublished - Dec 2007

Fingerprint

Dive into the research topics of 'Direct numerical simulation of turbulent flow and heat transfer in a square duct with natural convection'. Together they form a unique fingerprint.

Cite this