Skip to main navigation Skip to search Skip to main content

Development of a high-resolution rapid prototyping system for small size objects

  • Xi'an Jiaotong University

Research output: Contribution to journal › Article › peer-review

8 Scopus citations

Abstract

A high-resolution stereolithography (SL) system for fabricating small objects with complex microstructures has been developed. This novel SL system consists of a single mode He-Cd laser, an improved optical scanning system, a novel recoating system and a control system. A laser light spot with the diameter of 12.89 μm on the focal plane is obtained with the improved optical scanning system, and resin layers with the thickness of 20 μm can be built with the novel recoating system. Experimental studies were carried out to investigate the influences of the build parameters on the cured line width and depth with this novel SL system. The experimental results showed that the cured depth and width increase with the increasing ratio of laser power to scanning speed. And it is found that the cured line built using the high-resolution SL system is smaller in width and deeper in depth compared with the cured line fabricated in conventional SL system under the same scanning conditions. Based on the cured line width and depth obtained in the experiment, empirical equations predicting the cured line width and depth according to the ratio of laser power to scanning speed are established using a least-square fitting. The cured line width and depth predicted by the empirical equations provide a foundation to set up accurate line width compensation and appropriate layer thickness in the high-resolution SL system. Some small objects with microstructures have been fabricated with the new SL system.

Original languageEnglish
Pages (from-to)941-947
Number of pages7
JournalInternational Journal of Advanced Manufacturing Technology
Volume31
Issue number9-10
DOIs
StatePublished - Jan 2007

Keywords

  • Fabrication
  • High-resolution
  • Rapid prototyping
  • Small object with microstructures
  • Stereolithography

Fingerprint

Dive into the research topics of 'Development of a high-resolution rapid prototyping system for small size objects'. Together they form a unique fingerprint.

Cite this