Design and Comparison of Three Different Types of IE4 Efficiency Machines

Shaofeng Jia; Ping Zhang; Deliang Liang; Maocun Dai; Jinjun Liu

doi:10.1109/ICEMS.2019.8921786

Design and Comparison of Three Different Types of IE4 Efficiency Machines

Shaofeng Jia
, Ping Zhang
, Deliang Liang
, Maocun Dai
, Jinjun Liu

School of Electrical Engineering

Xi'an Jiaotong University
Yangzhou Huasheng Motors Manufacturing Corporation

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

18 Scopus citations

Abstract

The demand for highly efficient electric machines has been expanded in recent decade due to increase of energy consumption and the improvement of international standards for high efficiency machines. Although the rare-earth permanent magnet machines usually exhibit high performance, rare-earth resources are limited and their cost is high. In this case, this paper studies and compares the performance and cost of 2.2 kW copper-rotor induction machine (CR-IM), synchronous reluctance machine (SynRM), and PM-assisted synchronous reluctance machine (PMASynRM) achieving IE4 efficiency level. A finite-element method (FEM) is used to validate the performance of three machines. The results show that SynRM can achieve IE4 efficiency level with the lowest cost, but the power factor is a big challenge, PMASynRM has the best performance and a competitive cost advantage compared to CR-IM.

Original language	English
Title of host publication	2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019
Publisher	Institute of Electrical and Electronics Engineers Inc.
ISBN (Electronic)	9781728133980
DOIs	https://doi.org/10.1109/ICEMS.2019.8921786
State	Published - Aug 2019
Event	22nd International Conference on Electrical Machines and Systems, ICEMS 2019 - Harbin, China Duration: 11 Aug 2019 → 14 Aug 2019

Publication series

Name	2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019

Conference

Conference	22nd International Conference on Electrical Machines and Systems, ICEMS 2019
Country/Territory	China
City	Harbin
Period	11/08/19 → 14/08/19

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Keywords

Copper-rotor induction machine (CR-IM)
IE4 efficiency standards
PM-assisted synchronous reluctance machine (PMASynRM)
design optimization
finite-element analysis (FEA)
synchronous reluctance machine (SynRM)

Access to Document

10.1109/ICEMS.2019.8921786

Cite this

Jia, S., Zhang, P., Liang, D., Dai, M., & Liu, J. (2019). Design and Comparison of Three Different Types of IE4 Efficiency Machines. In 2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019 Article 8921786 (2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICEMS.2019.8921786

@inproceedings{8de83ab17c124c3e9f89064d0fe92b14,

title = "Design and Comparison of Three Different Types of IE4 Efficiency Machines",

abstract = "The demand for highly efficient electric machines has been expanded in recent decade due to increase of energy consumption and the improvement of international standards for high efficiency machines. Although the rare-earth permanent magnet machines usually exhibit high performance, rare-earth resources are limited and their cost is high. In this case, this paper studies and compares the performance and cost of 2.2 kW copper-rotor induction machine (CR-IM), synchronous reluctance machine (SynRM), and PM-assisted synchronous reluctance machine (PMASynRM) achieving IE4 efficiency level. A finite-element method (FEM) is used to validate the performance of three machines. The results show that SynRM can achieve IE4 efficiency level with the lowest cost, but the power factor is a big challenge, PMASynRM has the best performance and a competitive cost advantage compared to CR-IM.",

keywords = "Copper-rotor induction machine (CR-IM), IE4 efficiency standards, PM-assisted synchronous reluctance machine (PMASynRM), design optimization, finite-element analysis (FEA), synchronous reluctance machine (SynRM)",

author = "Shaofeng Jia and Ping Zhang and Deliang Liang and Maocun Dai and Jinjun Liu",

note = "Publisher Copyright: {\textcopyright} 2019 IEEE.; 22nd International Conference on Electrical Machines and Systems, ICEMS 2019 ; Conference date: 11-08-2019 Through 14-08-2019",

year = "2019",

month = aug,

doi = "10.1109/ICEMS.2019.8921786",

language = "英语",

series = "2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

booktitle = "2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019",

}

Jia, S, Zhang, P, Liang, D, Dai, M & Liu, J 2019, Design and Comparison of Three Different Types of IE4 Efficiency Machines. in 2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019., 8921786, 2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019, Institute of Electrical and Electronics Engineers Inc., 22nd International Conference on Electrical Machines and Systems, ICEMS 2019, Harbin, China, 11/08/19. https://doi.org/10.1109/ICEMS.2019.8921786

Design and Comparison of Three Different Types of IE4 Efficiency Machines. / Jia, Shaofeng; Zhang, Ping; Liang, Deliang et al.
2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019. Institute of Electrical and Electronics Engineers Inc., 2019. 8921786 (2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Design and Comparison of Three Different Types of IE4 Efficiency Machines

AU - Jia, Shaofeng

AU - Zhang, Ping

AU - Liang, Deliang

AU - Dai, Maocun

AU - Liu, Jinjun

PY - 2019/8

Y1 - 2019/8

N2 - The demand for highly efficient electric machines has been expanded in recent decade due to increase of energy consumption and the improvement of international standards for high efficiency machines. Although the rare-earth permanent magnet machines usually exhibit high performance, rare-earth resources are limited and their cost is high. In this case, this paper studies and compares the performance and cost of 2.2 kW copper-rotor induction machine (CR-IM), synchronous reluctance machine (SynRM), and PM-assisted synchronous reluctance machine (PMASynRM) achieving IE4 efficiency level. A finite-element method (FEM) is used to validate the performance of three machines. The results show that SynRM can achieve IE4 efficiency level with the lowest cost, but the power factor is a big challenge, PMASynRM has the best performance and a competitive cost advantage compared to CR-IM.

AB - The demand for highly efficient electric machines has been expanded in recent decade due to increase of energy consumption and the improvement of international standards for high efficiency machines. Although the rare-earth permanent magnet machines usually exhibit high performance, rare-earth resources are limited and their cost is high. In this case, this paper studies and compares the performance and cost of 2.2 kW copper-rotor induction machine (CR-IM), synchronous reluctance machine (SynRM), and PM-assisted synchronous reluctance machine (PMASynRM) achieving IE4 efficiency level. A finite-element method (FEM) is used to validate the performance of three machines. The results show that SynRM can achieve IE4 efficiency level with the lowest cost, but the power factor is a big challenge, PMASynRM has the best performance and a competitive cost advantage compared to CR-IM.

KW - Copper-rotor induction machine (CR-IM)

KW - IE4 efficiency standards

KW - PM-assisted synchronous reluctance machine (PMASynRM)

KW - design optimization

KW - finite-element analysis (FEA)

KW - synchronous reluctance machine (SynRM)

UR - https://www.scopus.com/pages/publications/85077112345

U2 - 10.1109/ICEMS.2019.8921786

DO - 10.1109/ICEMS.2019.8921786

M3 - 会议稿件

AN - SCOPUS:85077112345

T3 - 2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019

BT - 2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 22nd International Conference on Electrical Machines and Systems, ICEMS 2019

Y2 - 11 August 2019 through 14 August 2019

ER -

Jia S, Zhang P, Liang D, Dai M, Liu J. Design and Comparison of Three Different Types of IE4 Efficiency Machines. In 2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019. Institute of Electrical and Electronics Engineers Inc. 2019. 8921786. (2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019). doi: 10.1109/ICEMS.2019.8921786

Design and Comparison of Three Different Types of IE4 Efficiency Machines

Abstract

Publication series

Conference

UN SDGs

Keywords

Access to Document

Other files and links

Fingerprint

Cite this