Skip to main navigation Skip to search Skip to main content

Delivery and utilization of photo-energy for temperature control using a light-driven microfluidic control device at −40 °C

  • Jing Ge
  • , Mengmeng Qin
  • , Xu Zhang
  • , Xiaoyu Yang
  • , Ping Yang
  • , Hui Wang
  • , Gejun Liu
  • , Xinlei Zhou
  • , Bo Zhang
  • , Zhiguo Qu
  • , Yiyu Feng
  • , Wei Feng
  • Tianjin University
  • Xi'an Jiaotong University
  • Beijing University of Chemical Technology

Research output: Contribution to journal › Article › peer-review

23 Scopus citations

Abstract

Low-temperature energy harvest, delivery, and utilization pose significant challenges for thermal management in extreme environments owing to heat loss during transport and difficulty in temperature control. Herein, we propose a light-driven photo-energy delivery device with a series of photo-responsive alkoxy-grafted azobenzene-based phase-change materials (a-g-Azo PCMs). These a-g-Azo PCMs store and release crystallization and isomerization enthalpies, reaching a high energy density of 380.76 J/g even at a low temperature of −63.92 °C. On this basis, we fabricate a novel three-branch light-driven microfluidic control device for distributed energy recycling that achieves light absorption, energy storage, controlled movement, and selective release cyclically over a wide range of temperatures. The a-g-Azo PCMs move remote-controllably in the microfluidic device at an average velocity of 0.11–0.53 cm/s owing to the asymmetric thermal expansion effect controlled by the temperature difference. During movement, the optically triggered heat release of a-g-Azo PCMs achieves a temperature difference of 6.6 °C even at a low temperature of −40 °C. These results provide a new technology for energy harvest, delivery, and utilization in low-temperature environments via a remote manipulator.

Original languageEnglish
Article numbere1300
JournalSmartMat
Volume5
Issue number6
DOIs
StatePublished - Dec 2024

Keywords

  • a-g-Azo PCMs
  • high-energy storage
  • light-driven microfluidic control device
  • optically triggered heat release
  • ultralow temperature

Fingerprint

Dive into the research topics of 'Delivery and utilization of photo-energy for temperature control using a light-driven microfluidic control device at −40 °C'. Together they form a unique fingerprint.

Cite this