Control strategies and dynamic experimental tests on the wide-range and rapid load regulation of a first pilot multi-megawatts fossil-fired supercritical CO₂ power system

Supercritical CO₂ (sCO₂) power system is a research front in recent years due to its high efficiency and flexibility which is considered as a transformative power system in terms of consumption of the fluctuated and intermittent renewables. The merits of sCO₂ power systems have been widely shown by small-scale test loops. However, it is still very lack of the investigations on the control strategies based on real-time dynamic operational data of large-scale multi-megawatts pilot power system, especially for wide-range and rapid load regulation to demonstrate the feasibility of large-scale utilization and commercialization. A worldwide first pilot multi-megawatts SMART (Supercritical CO₂ Modular Advanced Research and Test) fossil-fired power system has been built and operated for more than 1000 h at TPRI (Thermal Power Research Institute), Xi'an, China with turbine inlet parameters of 20 MPa/600 °C/600 °C. The influence of key parameters on the dynamics of the system are experimental studied. In-depth tests of the wide-range load regulation and rapid load regulation of the SMART@TPRI power system are performed. The test results show that the key target parameters such as turbine inlet temperatures, compressor inlet temperature and pressure, sCO₂ mass flow rate and exhaust flue gas temperature can be well regulated by a set of well-developed control modules to ensure an efficient and safe operation during load variations. The SMART@TPRI power system can run stably and flexibly within the whole range from 0 %Pe to 100 %Pe. The averaged load ramp and load reduction rate achieves 6.35 %Pe/min and −6.37 %Pe/min, respectively, which is almost 3 ∼ 4 times than that of steam power system, under the control strategy of sliding pressure with fixed turbine inlet temperature by a combination of several novel well-developed control modules.