Combustion Ratio of Waste Tire Particle, PC and Mixture at Blast Temperature of BF

  • Jian liang Zhang
  • , Shan Ren
  • , Bu xin Su
  • , Yin he Lin
  • , Shi gang Long

Research output: Contribution to journalArticlepeer-review

6 Scopus citations

Abstract

In order to study the combustion characteristics of waste tire particle (WTP), pulverized coal (PC) and their mixture, the contents of CO, CO 2 and O 2 of off-gas during the combustion of WTP, PC and mixture under the condition of rich oxygen by 0-4% in blast and at 1 250 °C were measured simultaneously using synthetically infrared analyzer, and then the corresponding combustion ratio was calculated and compared. The results showed that the burning rate of WTP reached approximately 57%, which is much higher than that of PC (only about 18%) in the initial 650 s in fresh air, and then the increase of combustion rate of PC is faster than that of WTP; the combustion rate of PC improved remarkably with the addition of WTP. Meanwhile, the combustion rates of all these materials improved with the increase of oxygen content.

Original languageEnglish
Pages (from-to)12-16
Number of pages5
JournalJournal of Iron and Steel Research International
Volume19
Issue number2
DOIs
StatePublished - Feb 2012
Externally publishedYes

Keywords

  • Blast furnace
  • Combustion ratio
  • Pulverized coal
  • Waste tire particle

Fingerprint

Dive into the research topics of 'Combustion Ratio of Waste Tire Particle, PC and Mixture at Blast Temperature of BF'. Together they form a unique fingerprint.

Cite this