An Improved Maximum Energy Efficiency Tracking Control Method for Inductive Power Transfer Systems

Shuo Chen; Wen Ding; Ke Li; Ruiming Hu; Zhaoguo Liu

doi:10.1109/ECCE-Asia49820.2021.9479324

An Improved Maximum Energy Efficiency Tracking Control Method for Inductive Power Transfer Systems

Shuo Chen
, Wen Ding
, Ke Li
, Ruiming Hu
, Zhaoguo Liu

School of Electrical Engineering

Xi'an Jiaotong University

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

A transmitting-side phase shift control strategy based on an improved perturbation and observation (P&O) method is proposed to achieve maximum energy efficiency tracking (MEET) for LCL-LCL compensated inductive power transfer (IPT) systems, which is based on minimizing the input dc current. In this method, the tracking process for the maximum efficiency point is divided into two stages (tracking and oscillation stage), and an adaptive perturbation step size is proposed. In the tracking stage, a large step size is set for the short time to reach the maximum efficiency point. The decreasing step size in the oscillation stage is introduced to reduce the steady state oscillation existed in the conventional method, and the corresponding state switching conditions are given. Hence, the trade-off for MEET between the convergence rate and the oscillation can be removed by adopting this method. Finally, simulation results are given to verify the effectiveness of the proposed algorithm.

Original language	English
Title of host publication	Proceedings of the Energy Conversion Congress and Exposition - Asia, ECCE Asia 2021
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	153-158
Number of pages	6
ISBN (Electronic)	9781728163444
DOIs	https://doi.org/10.1109/ECCE-Asia49820.2021.9479324
State	Published - 24 May 2021
Event	12th IEEE Energy Conversion Congress and Exposition - Asia, ECCE Asia 2021 - Virtual, Singapore, Singapore Duration: 24 May 2021 → 27 May 2021

Publication series

Name	Proceedings of the Energy Conversion Congress and Exposition - Asia, ECCE Asia 2021

Conference

Conference	12th IEEE Energy Conversion Congress and Exposition - Asia, ECCE Asia 2021
Country/Territory	Singapore
City	Virtual, Singapore
Period	24/05/21 → 27/05/21

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Keywords

inductive power transfer (IPT)
maximum energy efficiency tracking (MEET)
perturbation and observation (P&O) method

Access to Document

10.1109/ECCE-Asia49820.2021.9479324

Cite this

Chen, S., Ding, W., Li, K., Hu, R., & Liu, Z. (2021). An Improved Maximum Energy Efficiency Tracking Control Method for Inductive Power Transfer Systems. In Proceedings of the Energy Conversion Congress and Exposition - Asia, ECCE Asia 2021 (pp. 153-158). Article 9479324 (Proceedings of the Energy Conversion Congress and Exposition - Asia, ECCE Asia 2021). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ECCE-Asia49820.2021.9479324

Chen, Shuo ; Ding, Wen ; Li, Ke et al. / An Improved Maximum Energy Efficiency Tracking Control Method for Inductive Power Transfer Systems. Proceedings of the Energy Conversion Congress and Exposition - Asia, ECCE Asia 2021. Institute of Electrical and Electronics Engineers Inc., 2021. pp. 153-158 (Proceedings of the Energy Conversion Congress and Exposition - Asia, ECCE Asia 2021).

@inproceedings{0ce9673eb9c94114accfe132534b4e99,

title = "An Improved Maximum Energy Efficiency Tracking Control Method for Inductive Power Transfer Systems",

abstract = "A transmitting-side phase shift control strategy based on an improved perturbation and observation (P\&O) method is proposed to achieve maximum energy efficiency tracking (MEET) for LCL-LCL compensated inductive power transfer (IPT) systems, which is based on minimizing the input dc current. In this method, the tracking process for the maximum efficiency point is divided into two stages (tracking and oscillation stage), and an adaptive perturbation step size is proposed. In the tracking stage, a large step size is set for the short time to reach the maximum efficiency point. The decreasing step size in the oscillation stage is introduced to reduce the steady state oscillation existed in the conventional method, and the corresponding state switching conditions are given. Hence, the trade-off for MEET between the convergence rate and the oscillation can be removed by adopting this method. Finally, simulation results are given to verify the effectiveness of the proposed algorithm.",

keywords = "inductive power transfer (IPT), maximum energy efficiency tracking (MEET), perturbation and observation (P\&O) method",

author = "Shuo Chen and Wen Ding and Ke Li and Ruiming Hu and Zhaoguo Liu",

note = "Publisher Copyright: {\textcopyright} 2021 IEEE.; 12th IEEE Energy Conversion Congress and Exposition - Asia, ECCE Asia 2021 ; Conference date: 24-05-2021 Through 27-05-2021",

year = "2021",

month = may,

day = "24",

doi = "10.1109/ECCE-Asia49820.2021.9479324",

language = "英语",

series = "Proceedings of the Energy Conversion Congress and Exposition - Asia, ECCE Asia 2021",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "153--158",

booktitle = "Proceedings of the Energy Conversion Congress and Exposition - Asia, ECCE Asia 2021",

}

Chen, S, Ding, W, Li, K, Hu, R & Liu, Z 2021, An Improved Maximum Energy Efficiency Tracking Control Method for Inductive Power Transfer Systems. in Proceedings of the Energy Conversion Congress and Exposition - Asia, ECCE Asia 2021., 9479324, Proceedings of the Energy Conversion Congress and Exposition - Asia, ECCE Asia 2021, Institute of Electrical and Electronics Engineers Inc., pp. 153-158, 12th IEEE Energy Conversion Congress and Exposition - Asia, ECCE Asia 2021, Virtual, Singapore, Singapore, 24/05/21. https://doi.org/10.1109/ECCE-Asia49820.2021.9479324

An Improved Maximum Energy Efficiency Tracking Control Method for Inductive Power Transfer Systems. / Chen, Shuo; Ding, Wen; Li, Ke et al.
Proceedings of the Energy Conversion Congress and Exposition - Asia, ECCE Asia 2021. Institute of Electrical and Electronics Engineers Inc., 2021. p. 153-158 9479324 (Proceedings of the Energy Conversion Congress and Exposition - Asia, ECCE Asia 2021).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - An Improved Maximum Energy Efficiency Tracking Control Method for Inductive Power Transfer Systems

AU - Chen, Shuo

AU - Ding, Wen

AU - Li, Ke

AU - Hu, Ruiming

AU - Liu, Zhaoguo

PY - 2021/5/24

Y1 - 2021/5/24

N2 - A transmitting-side phase shift control strategy based on an improved perturbation and observation (P&O) method is proposed to achieve maximum energy efficiency tracking (MEET) for LCL-LCL compensated inductive power transfer (IPT) systems, which is based on minimizing the input dc current. In this method, the tracking process for the maximum efficiency point is divided into two stages (tracking and oscillation stage), and an adaptive perturbation step size is proposed. In the tracking stage, a large step size is set for the short time to reach the maximum efficiency point. The decreasing step size in the oscillation stage is introduced to reduce the steady state oscillation existed in the conventional method, and the corresponding state switching conditions are given. Hence, the trade-off for MEET between the convergence rate and the oscillation can be removed by adopting this method. Finally, simulation results are given to verify the effectiveness of the proposed algorithm.

AB - A transmitting-side phase shift control strategy based on an improved perturbation and observation (P&O) method is proposed to achieve maximum energy efficiency tracking (MEET) for LCL-LCL compensated inductive power transfer (IPT) systems, which is based on minimizing the input dc current. In this method, the tracking process for the maximum efficiency point is divided into two stages (tracking and oscillation stage), and an adaptive perturbation step size is proposed. In the tracking stage, a large step size is set for the short time to reach the maximum efficiency point. The decreasing step size in the oscillation stage is introduced to reduce the steady state oscillation existed in the conventional method, and the corresponding state switching conditions are given. Hence, the trade-off for MEET between the convergence rate and the oscillation can be removed by adopting this method. Finally, simulation results are given to verify the effectiveness of the proposed algorithm.

KW - inductive power transfer (IPT)

KW - maximum energy efficiency tracking (MEET)

KW - perturbation and observation (P&O) method

UR - https://www.scopus.com/pages/publications/85114204596

U2 - 10.1109/ECCE-Asia49820.2021.9479324

DO - 10.1109/ECCE-Asia49820.2021.9479324

M3 - 会议稿件

AN - SCOPUS:85114204596

T3 - Proceedings of the Energy Conversion Congress and Exposition - Asia, ECCE Asia 2021

SP - 153

EP - 158

BT - Proceedings of the Energy Conversion Congress and Exposition - Asia, ECCE Asia 2021

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 12th IEEE Energy Conversion Congress and Exposition - Asia, ECCE Asia 2021

Y2 - 24 May 2021 through 27 May 2021

ER -

Chen S, Ding W, Li K, Hu R, Liu Z. An Improved Maximum Energy Efficiency Tracking Control Method for Inductive Power Transfer Systems. In Proceedings of the Energy Conversion Congress and Exposition - Asia, ECCE Asia 2021. Institute of Electrical and Electronics Engineers Inc. 2021. p. 153-158. 9479324. (Proceedings of the Energy Conversion Congress and Exposition - Asia, ECCE Asia 2021). doi: 10.1109/ECCE-Asia49820.2021.9479324

An Improved Maximum Energy Efficiency Tracking Control Method for Inductive Power Transfer Systems

Abstract

Publication series

Conference

UN SDGs

Keywords

Access to Document

Other files and links

Fingerprint

Cite this