Al2O3-(Ba0.5Sr0.5)TiO 3 composite oxide films on etched aluminum foil by sol-gel coating and anodizing

Youlong Xu

doi:10.1016/j.ceramint.2003.12.137

Al₂O₃-(Ba_0.5Sr_0.5)TiO ₃ composite oxide films on etched aluminum foil by sol-gel coating and anodizing

Youlong Xu

Faculty of Electronic and Information Engineering

Research output: Contribution to journal › Conference article › peer-review

30 Scopus citations

Abstract

(Ba_0.5Sr_0.5)TiO₃ (BST) coating was applied to the etched aluminum foils by sol-gel dip-coating with (Ba _0.5Sr_0.5)TiO₃ sol prepared by mixing tetrabutyl titanate, barium acetate, strontium acetate, diethylene glycol, acetic acid and distilled water. After annealing under 500-600°C in air, Al ₂O₃-BST composite oxide film was formed on the surface of the etched aluminum foil by anodizing galvanostatically in a neutral adipite and borate solution. The BST powders annealed under different temperatures were characterized by TG-DTA and X-ray diffraction (XRD), and the specific capacitance of the coated samples annealed under different temperatures and times was measured. It was experimentally shown that the specific capacitance of the samples with BST coating is greater than without BST coating. The composite films are promising to be used as the dielectric of electrolytic capacitor.

Original language	English
Pages (from-to)	1741-1743
Number of pages	3
Journal	Ceramics International
Volume	30
Issue number	7
DOIs	https://doi.org/10.1016/j.ceramint.2003.12.137
State	Published - 2004
Event	3rd Asian Meeting on Electroceramics - Singapore, Singapore Duration: 7 Dec 2003 → 11 Dec 2003

Keywords

A. Films
A. Sol-gel processes
Aluminum electrolytic capacitor
Anodizing
B. Composites
BST

Access to Document

10.1016/j.ceramint.2003.12.137

Cite this

@article{2a3d18e317bf40e6a6c0c0b8ffbedc35,

title = "Al2O3-(Ba0.5Sr0.5)TiO 3 composite oxide films on etched aluminum foil by sol-gel coating and anodizing",

abstract = "(Ba0.5Sr0.5)TiO3 (BST) coating was applied to the etched aluminum foils by sol-gel dip-coating with (Ba 0.5Sr0.5)TiO3 sol prepared by mixing tetrabutyl titanate, barium acetate, strontium acetate, diethylene glycol, acetic acid and distilled water. After annealing under 500-600°C in air, Al 2O3-BST composite oxide film was formed on the surface of the etched aluminum foil by anodizing galvanostatically in a neutral adipite and borate solution. The BST powders annealed under different temperatures were characterized by TG-DTA and X-ray diffraction (XRD), and the specific capacitance of the coated samples annealed under different temperatures and times was measured. It was experimentally shown that the specific capacitance of the samples with BST coating is greater than without BST coating. The composite films are promising to be used as the dielectric of electrolytic capacitor.",

keywords = "A. Films, A. Sol-gel processes, Aluminum electrolytic capacitor, Anodizing, B. Composites, BST",

author = "Youlong Xu",

year = "2004",

doi = "10.1016/j.ceramint.2003.12.137",

language = "英语",

volume = "30",

pages = "1741--1743",

journal = "Ceramics International",

issn = "0272-8842",

publisher = "Elsevier Ltd",

number = "7",

note = "3rd Asian Meeting on Electroceramics ; Conference date: 07-12-2003 Through 11-12-2003",

}

TY - JOUR

T1 - Al2O3-(Ba0.5Sr0.5)TiO 3 composite oxide films on etched aluminum foil by sol-gel coating and anodizing

AU - Xu, Youlong

PY - 2004

Y1 - 2004

N2 - (Ba0.5Sr0.5)TiO3 (BST) coating was applied to the etched aluminum foils by sol-gel dip-coating with (Ba 0.5Sr0.5)TiO3 sol prepared by mixing tetrabutyl titanate, barium acetate, strontium acetate, diethylene glycol, acetic acid and distilled water. After annealing under 500-600°C in air, Al 2O3-BST composite oxide film was formed on the surface of the etched aluminum foil by anodizing galvanostatically in a neutral adipite and borate solution. The BST powders annealed under different temperatures were characterized by TG-DTA and X-ray diffraction (XRD), and the specific capacitance of the coated samples annealed under different temperatures and times was measured. It was experimentally shown that the specific capacitance of the samples with BST coating is greater than without BST coating. The composite films are promising to be used as the dielectric of electrolytic capacitor.

AB - (Ba0.5Sr0.5)TiO3 (BST) coating was applied to the etched aluminum foils by sol-gel dip-coating with (Ba 0.5Sr0.5)TiO3 sol prepared by mixing tetrabutyl titanate, barium acetate, strontium acetate, diethylene glycol, acetic acid and distilled water. After annealing under 500-600°C in air, Al 2O3-BST composite oxide film was formed on the surface of the etched aluminum foil by anodizing galvanostatically in a neutral adipite and borate solution. The BST powders annealed under different temperatures were characterized by TG-DTA and X-ray diffraction (XRD), and the specific capacitance of the coated samples annealed under different temperatures and times was measured. It was experimentally shown that the specific capacitance of the samples with BST coating is greater than without BST coating. The composite films are promising to be used as the dielectric of electrolytic capacitor.

KW - A. Films

KW - A. Sol-gel processes

KW - Aluminum electrolytic capacitor

KW - Anodizing

KW - B. Composites

KW - BST

UR - https://www.scopus.com/pages/publications/4344653833

U2 - 10.1016/j.ceramint.2003.12.137

DO - 10.1016/j.ceramint.2003.12.137

M3 - 会议文章

AN - SCOPUS:4344653833

SN - 0272-8842

VL - 30

SP - 1741

EP - 1743

JO - Ceramics International

JF - Ceramics International

IS - 7

T2 - 3rd Asian Meeting on Electroceramics

Y2 - 7 December 2003 through 11 December 2003

ER -

Al₂O₃-(Ba_0.5Sr_0.5)TiO ₃ composite oxide films on etched aluminum foil by sol-gel coating and anodizing

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this