Skip to main navigation Skip to search Skip to main content

Airfoil friction drag reduction based on grid-type and super-dense array plasma actuators

  • Ziqi Fang
  • , Haohua Zong
  • , Yun Wu
  • , Hua Liang
  • , Zhi Su
  • Xi'an Jiaotong University
  • Air Force Engineering University Xian

Research output: Contribution to journal › Article › peer-review

10 Scopus citations

Abstract

To improve the cruise flight performance of aircraft, two new configurations of plasma actuators (grid-type and super-dense array) were investigated to reduce the turbulent skin friction drag of a low-speed airfoil. The induced jet characteristics of the two actuators in quiescent air were diagnosed with high-speed particle image velocimetry (PIV), and their drag reduction efficiencies were examined under different operating conditions in a wind tunnel. The results showed that the grid-type plasma actuator was capable of producing a wall-normal jet array (peak magnitude: 1.07 m/s) similar to that generated in a micro-blowing technique, while the super-dense array plasma actuator created a wavy wall-parallel jet (magnitude: 0.94 m/s) due to the discrete spanwise electrostatic forces. Under a comparable electrical power consumption level, the super-dense array plasma actuator array significantly outperformed the grid-type configuration, reducing the total airfoil friction drag by approximately 22% at a free-stream velocity of 20 m/s. The magnitude of drag reduction was proportional to the dimensionless jet velocity ratio (r), and a threshold r = 0.014 existed under which little impact on airfoil drag could be discerned.

Original languageEnglish
Article number025503
JournalPlasma Science and Technology
Volume26
Issue number2
DOIs
StatePublished - 1 Feb 2024

Keywords

  • airfoil
  • drag reduction
  • flow control
  • plasma actuator

Fingerprint

Dive into the research topics of 'Airfoil friction drag reduction based on grid-type and super-dense array plasma actuators'. Together they form a unique fingerprint.

Cite this