Acoustic localization of partial discharge sources in power transformers using a particle-swarm-optimization-route-searching algorithm

Methods to infer the location of partial discharge (PD) in high-power transformers using acoustic emission (AE) data have been extensively studied. The inner complex structure of the transformers is one of the most critical points in localization with AE method. Windings and cores affect acoustic wave propagation by changing the arrival time because of inhomogeneous propagation. A transformer physical model has been established herein by taking these complex factors into consideration. Each node in the model is a potential PD position, and an acoustic wave route comprise a series of nodes. The velocity and propagation factors are set for each node according to its acoustic wave propagation characteristics. A propagation-time estimation algorithm is proposed to calculate the propagation-time. Based on the transformer physical model, a particle-swarm-optimization route-searching (PSORS) algorithm is employed for searching the position of the PD source. By comparing time differences of measured AE signals and the ones estimated by the PSORS algorithm, the velocities and positions of particles are continually adjusted, which can ensure their convergence to the PD source position. Localization experiments were performed in 35 and 110 kV transformers, respectively, to verify the applicability of the proposed algorithm. A protrusion defect is used to trigger PD pulses, and four AE sensors with two different arrangements are employed. The results confirm that the accuracy of proposed localization method is insensitive to the presence of metal structures blocking acoustic wave routes.