A study of mathematic modeling of VSC for electromechanical transient analysis

Yan Zhao; Xue Hao Hu; Zhi Yuan He; Guang Fu Tang

doi:10.1109/CICED.2008.5211719

A study of mathematic modeling of VSC for electromechanical transient analysis

Yan Zhao
, Xue Hao Hu
, Zhi Yuan He
, Guang Fu Tang

School of Electrical Engineering

State Grid Corporation of China

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

9 Scopus citations

Abstract

Recently, more and more attention has been paid to the power generation from renewable energy resources, such as wind energy, solar energy etc. As one of the interconnecting scheme with power grid of renewable energy resources, voltage source converter (VSC) has been gradually used in power system. Therefore, special attention has also been devoted to research about VSC, such as mathematics modeling, external characteristic of VSC and its impact on power system. This paper focuses on mathematics modeling of VSC and it's simplification. Firstly, the mathematic model of VSC based on switching function, which can describe working principle of VSC, is built. Then, the model is decomposed into Fourier series and simplified. Finally, comparative analysis between detailed mathematical model and its simplified model is carried out, the simulation result shows that the simplified model presented in this paper can accurately describe the dynamic characteristic of VSC and be applied to simulate and analyze the electromechanical process in VSC integrated power system.

Original language	English
Title of host publication	2008 China International Conference on Electricity Distribution, CICED 2008
DOIs	https://doi.org/10.1109/CICED.2008.5211719
State	Published - 2008
Event	2008 China International Conference on Electricity Distribution, CICED 2008 - Guangzhou, China Duration: 10 Dec 2008 → 13 Dec 2008

Publication series

Name	2008 China International Conference on Electricity Distribution, CICED 2008

Conference

Conference	2008 China International Conference on Electricity Distribution, CICED 2008
Country/Territory	China
City	Guangzhou
Period	10/12/08 → 13/12/08

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Keywords

Distributed generation (DG)
Electromechanical transient analysis
High voltage direct current transmission (HVDC)
Power system
Voltage source converter (VSC)

Access to Document

10.1109/CICED.2008.5211719

Cite this

@inproceedings{8801c92038804149b5727a9103be7b0c,

title = "A study of mathematic modeling of VSC for electromechanical transient analysis",

abstract = "Recently, more and more attention has been paid to the power generation from renewable energy resources, such as wind energy, solar energy etc. As one of the interconnecting scheme with power grid of renewable energy resources, voltage source converter (VSC) has been gradually used in power system. Therefore, special attention has also been devoted to research about VSC, such as mathematics modeling, external characteristic of VSC and its impact on power system. This paper focuses on mathematics modeling of VSC and it's simplification. Firstly, the mathematic model of VSC based on switching function, which can describe working principle of VSC, is built. Then, the model is decomposed into Fourier series and simplified. Finally, comparative analysis between detailed mathematical model and its simplified model is carried out, the simulation result shows that the simplified model presented in this paper can accurately describe the dynamic characteristic of VSC and be applied to simulate and analyze the electromechanical process in VSC integrated power system.",

keywords = "Distributed generation (DG), Electromechanical transient analysis, High voltage direct current transmission (HVDC), Power system, Voltage source converter (VSC)",

author = "Yan Zhao and Hu, \{Xue Hao\} and He, \{Zhi Yuan\} and Tang, \{Guang Fu\}",

year = "2008",

doi = "10.1109/CICED.2008.5211719",

language = "英语",

isbn = "9781424433735",

series = "2008 China International Conference on Electricity Distribution, CICED 2008",

booktitle = "2008 China International Conference on Electricity Distribution, CICED 2008",

note = "2008 China International Conference on Electricity Distribution, CICED 2008 ; Conference date: 10-12-2008 Through 13-12-2008",

}

Zhao, Y, Hu, XH, He, ZY & Tang, GF 2008, A study of mathematic modeling of VSC for electromechanical transient analysis. in 2008 China International Conference on Electricity Distribution, CICED 2008., 5211719, 2008 China International Conference on Electricity Distribution, CICED 2008, 2008 China International Conference on Electricity Distribution, CICED 2008, Guangzhou, China, 10/12/08. https://doi.org/10.1109/CICED.2008.5211719

A study of mathematic modeling of VSC for electromechanical transient analysis. / Zhao, Yan; Hu, Xue Hao; He, Zhi Yuan et al.
2008 China International Conference on Electricity Distribution, CICED 2008. 2008. 5211719 (2008 China International Conference on Electricity Distribution, CICED 2008).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - A study of mathematic modeling of VSC for electromechanical transient analysis

AU - Zhao, Yan

AU - Hu, Xue Hao

AU - He, Zhi Yuan

AU - Tang, Guang Fu

PY - 2008

Y1 - 2008

N2 - Recently, more and more attention has been paid to the power generation from renewable energy resources, such as wind energy, solar energy etc. As one of the interconnecting scheme with power grid of renewable energy resources, voltage source converter (VSC) has been gradually used in power system. Therefore, special attention has also been devoted to research about VSC, such as mathematics modeling, external characteristic of VSC and its impact on power system. This paper focuses on mathematics modeling of VSC and it's simplification. Firstly, the mathematic model of VSC based on switching function, which can describe working principle of VSC, is built. Then, the model is decomposed into Fourier series and simplified. Finally, comparative analysis between detailed mathematical model and its simplified model is carried out, the simulation result shows that the simplified model presented in this paper can accurately describe the dynamic characteristic of VSC and be applied to simulate and analyze the electromechanical process in VSC integrated power system.

AB - Recently, more and more attention has been paid to the power generation from renewable energy resources, such as wind energy, solar energy etc. As one of the interconnecting scheme with power grid of renewable energy resources, voltage source converter (VSC) has been gradually used in power system. Therefore, special attention has also been devoted to research about VSC, such as mathematics modeling, external characteristic of VSC and its impact on power system. This paper focuses on mathematics modeling of VSC and it's simplification. Firstly, the mathematic model of VSC based on switching function, which can describe working principle of VSC, is built. Then, the model is decomposed into Fourier series and simplified. Finally, comparative analysis between detailed mathematical model and its simplified model is carried out, the simulation result shows that the simplified model presented in this paper can accurately describe the dynamic characteristic of VSC and be applied to simulate and analyze the electromechanical process in VSC integrated power system.

KW - Distributed generation (DG)

KW - Electromechanical transient analysis

KW - High voltage direct current transmission (HVDC)

KW - Power system

KW - Voltage source converter (VSC)

UR - https://www.scopus.com/pages/publications/70449394028

U2 - 10.1109/CICED.2008.5211719

DO - 10.1109/CICED.2008.5211719

M3 - 会议稿件

AN - SCOPUS:70449394028

SN - 9781424433735

T3 - 2008 China International Conference on Electricity Distribution, CICED 2008

BT - 2008 China International Conference on Electricity Distribution, CICED 2008

T2 - 2008 China International Conference on Electricity Distribution, CICED 2008

Y2 - 10 December 2008 through 13 December 2008

ER -

A study of mathematic modeling of VSC for electromechanical transient analysis

Abstract

Publication series

Conference

UN SDGs

Keywords

Access to Document

Other files and links

Fingerprint

Cite this