Skip to main navigation Skip to search Skip to main content

A Structural-Prior-Guided Mobile Continuum Robotic System for In-Situ Aero-Engine Blade Inspection

  • Xi'an Jiaotong University
  • Xi'an Jiaotong University
  • China Aerospace Science and Technology Corporation

Research output: Contribution to journal › Article › peer-review

Abstract

Inside aero-engine low-pressure compressors, dense blade arrays, narrow interstage passages, and limited entry conditions make in-situ visual inspection dependent on controlled delivery of a tip-mounted visual payload.This paper presents a structural-prior-guided mobile continuum robotic system for in-situ aero-engine blade visual inspection, together with a structural-prior-guided channel planning and corridor-constrained whole-arm tracking method.Engine blade structural parameters are first used to analytically generate inter-blade gap candidates and construct a structured channel from the target stage toward the inlet side.The discrete channel is then optimized into a B-spline reference centerline and expanded into a tubular tracking corridor. During tracking, the continuum arm is represented by distributed section keypoints, and finite-horizon section-wise optimization keeps these keypoints inside the corridor.Simulation experiments across three target depths show that the proposed planner produces shorter, higher-clearance, and lower-curvature reference trajectories than RRT and RRT*. Whole-arm tracking experiments further show high tracking success rates and low keypoint errors.Representative laboratory engine-mock-up experiments with an integrated mobile continuum robotic prototype further show that the system can enter interstage blade passages from different entry holes and acquire local blade images through the tip-mounted visual unit.These results demonstrate the integrated use of structural-prior-guided channel planning, corridor-constrained whole-arm tracking, and tip-view visual acquisition for aero-engine blade inspection.

Original languageEnglish
JournalIEEE Transactions on Instrumentation and Measurement
DOIs
StateAccepted/In press - 2026

Keywords

  • Aero-engine blade inspection
  • corridor-constrained whole-arm tracking
  • mobile continuum robotic system
  • structural-prior-guided channel planning

Fingerprint

Dive into the research topics of 'A Structural-Prior-Guided Mobile Continuum Robotic System for In-Situ Aero-Engine Blade Inspection'. Together they form a unique fingerprint.

Cite this