A new test method to obtain biaxial tensile behaviors of solid propellant at high strain rates

A new test method was proposed and applied for studying the biaxial tensile behaviors of hydroxyl-terminated polybutadiene (HTPB) propellant at high strain rates. The biaxial tensile stress responses of the propellant at room temperature and at different strain rates (0.40–85.71 s⁻¹) were obtained through the use of biaxial tensile strip samples, a new designed aluminum apparatus and a uniaxial Instron testing machine. A high-speed camera and scanning electron microscop (SEM) were employed to observe the biaxial tensile deformation and the damage of HTPB propellant under the test conditions. The results indicated that strain rate could remarkably influence the biaxial tensile behaviors of HTPB propellant. The effect of strain rate on the characteristics of stress–strain curves, mechanical properties and fracture mechanisms was consistent with that in uniaxial tension. However, the biaxial weakening of HTPB propellant was obvious. The strain at biaxial maximum tensile stress was between 10 and 30 % lower than that at the corresponding uniaxial case. Finally, the correlations between the fracture mechanisms and the mechanical properties of HTPB propellant, stress state and the damage of HTPB propellant were discussed. The damage of the propellant under the biaxial tensile test was less serious than that under uniaxial tension at the same strain rate. In addition, continuously increasing strain rate could change the fracture mechanism of the propellant under the biaxial and uniaxial tensile tests. In this investigation, the dominating fracture mechanism of HTPB propellant changed from the dewetting and matrix tearing at lower strain rate to the particles fracture at higher strain rate.