4E assessment of ejector-enhanced R290 heat pump cycle with a sub-cooler for cold region applications

Currently, the worldwide implementation of the Montreal Protocol has accelerated the development of low GWP refrigerants. R290 as an alternative refrigerant with low GWP has great advantages over R134a for heat pump applications. However, the use of expansion valve throttling in the heat pump cycle has a large irreversible loss. Therefore, an ejector-enhanced sub-cooler vapor injection heat pump cycle (ESVIC) with R290 for water heating is proposed in this paper to improve the energy efficiency by applying ejector. The thermodynamic models are established based on the 4E (energy, exergy, economic and environmental) analysis to compare its performance with the basic ejector-enhanced heat pump cycle (BEEC) and the sub-cooler vapor injection heat pump cycle (SVIC). The energy analysis results show that compared with the BEEC and SVIC, the volumetric heating capacity of the ESVIC is improved by 42.0 % and 21.2 %, and the heating coefficient of performance (COP_h) of the ESVIC is improved by 27.6 % and 5.3 %, respectively. The exergy analysis results indicate that in BEEC, SVIC and ESVIC the exergy destruction of the expansion valves is 0.3 %, 13.5 % and 0.8 %, respectively. It is indicated that the adoption of ejector can significantly decrease the exergy destruction of expansion valves. Moreover, the environmental analysis results reveal that the carbon emissions of ESVIC is 21.5 % and 5.0 % lower than those of BEEC and SVIC, respectively. Besides, for the ESVIC system, the carbon emissions of the life cycle climate performance when using R290 are 9.9 % lower than that of using R134a, indicating that the R290 is a potential substitute for R134a in heat pump applications. The economic analysis results demonstrate that the unit exergy production costs of ESVIC is 21.6 % and 5.1 % lower than BEEC and SVIC, respectively.