3D printing PMN-PT textured ceramics for transducer applications

Kun Zheng; Yi Quan; Dafei Ding; Jian Zhuang; Chunlong Fei; Jinyan Zhao; Lingyan Wang; Tianlong Zhao; Zhe Wang; Yifan Zhao; Chenying Wang; Zhuangde Jiang; Shanghua Wu; Wei Ren

doi:10.1016/j.ceramint.2024.02.225

3D printing PMN-PT textured ceramics for transducer applications

Kun Zheng
, Yi Quan
, Dafei Ding
, Jian Zhuang
, Chunlong Fei
, Jinyan Zhao
, Lingyan Wang
, Tianlong Zhao
, Zhe Wang
, Yifan Zhao
, Chenying Wang
, Zhuangde Jiang
, Shanghua Wu
, Wei Ren

Research output: Contribution to journal › Article › peer-review

6 Scopus citations

Abstract

3D printing stereolithography (SL) technique were successfully applied in the preparation of <001>-textured 0.71Pb(Mg_1/3Nb_2/3)O₃-0.29PbTiO₃ (PMN-29PT) ceramics in this work. The as-sintered textured ceramics show obvious grain orientation control effects, and the relative density reaches 93% of the theoretical density. The obtained ceramics demonstrate typical dielectric/ferroelectric/piezoelectric properties, enabling the device applications. The ultrasonic transducer with the center frequency of 6.7 MHz and the −6 dB bandwidth of 25% are designed and prepared based on the obtained textured ceramic. This work signifies the great potential of 3D printing SL technology on the fabrication of piezoelectric ceramic elements for advanced applications.

Original language	English
Pages (from-to)	51870-51876
Number of pages	7
Journal	Ceramics International
Volume	50
Issue number	23
DOIs	https://doi.org/10.1016/j.ceramint.2024.02.225
State	Published - 1 Dec 2024

Keywords

3D printing
Stereolithography
Textured piezoelectric ceramic
Transducer

Access to Document

10.1016/j.ceramint.2024.02.225

Cite this

@article{97d89b2746904fc69deb6e7d351b76ce,

title = "3D printing PMN-PT textured ceramics for transducer applications",

abstract = "3D printing stereolithography (SL) technique were successfully applied in the preparation of <001>-textured 0.71Pb(Mg1/3Nb2/3)O3-0.29PbTiO3 (PMN-29PT) ceramics in this work. The as-sintered textured ceramics show obvious grain orientation control effects, and the relative density reaches 93\% of the theoretical density. The obtained ceramics demonstrate typical dielectric/ferroelectric/piezoelectric properties, enabling the device applications. The ultrasonic transducer with the center frequency of 6.7 MHz and the −6 dB bandwidth of 25\% are designed and prepared based on the obtained textured ceramic. This work signifies the great potential of 3D printing SL technology on the fabrication of piezoelectric ceramic elements for advanced applications.",

keywords = "3D printing, Stereolithography, Textured piezoelectric ceramic, Transducer",

author = "Kun Zheng and Yi Quan and Dafei Ding and Jian Zhuang and Chunlong Fei and Jinyan Zhao and Lingyan Wang and Tianlong Zhao and Zhe Wang and Yifan Zhao and Chenying Wang and Zhuangde Jiang and Shanghua Wu and Wei Ren",

note = "Publisher Copyright: {\textcopyright} 2024 Elsevier Ltd and Techna Group S.r.l.",

year = "2024",

month = dec,

day = "1",

doi = "10.1016/j.ceramint.2024.02.225",

language = "英语",

volume = "50",

pages = "51870--51876",

journal = "Ceramics International",

issn = "0272-8842",

publisher = "Elsevier Ltd",

number = "23",

}

TY - JOUR

T1 - 3D printing PMN-PT textured ceramics for transducer applications

AU - Zheng, Kun

AU - Quan, Yi

AU - Ding, Dafei

AU - Zhuang, Jian

AU - Fei, Chunlong

AU - Zhao, Jinyan

AU - Wang, Lingyan

AU - Zhao, Tianlong

AU - Wang, Zhe

AU - Zhao, Yifan

AU - Wang, Chenying

AU - Jiang, Zhuangde

AU - Wu, Shanghua

AU - Ren, Wei

PY - 2024/12/1

Y1 - 2024/12/1

N2 - 3D printing stereolithography (SL) technique were successfully applied in the preparation of <001>-textured 0.71Pb(Mg1/3Nb2/3)O3-0.29PbTiO3 (PMN-29PT) ceramics in this work. The as-sintered textured ceramics show obvious grain orientation control effects, and the relative density reaches 93% of the theoretical density. The obtained ceramics demonstrate typical dielectric/ferroelectric/piezoelectric properties, enabling the device applications. The ultrasonic transducer with the center frequency of 6.7 MHz and the −6 dB bandwidth of 25% are designed and prepared based on the obtained textured ceramic. This work signifies the great potential of 3D printing SL technology on the fabrication of piezoelectric ceramic elements for advanced applications.

AB - 3D printing stereolithography (SL) technique were successfully applied in the preparation of <001>-textured 0.71Pb(Mg1/3Nb2/3)O3-0.29PbTiO3 (PMN-29PT) ceramics in this work. The as-sintered textured ceramics show obvious grain orientation control effects, and the relative density reaches 93% of the theoretical density. The obtained ceramics demonstrate typical dielectric/ferroelectric/piezoelectric properties, enabling the device applications. The ultrasonic transducer with the center frequency of 6.7 MHz and the −6 dB bandwidth of 25% are designed and prepared based on the obtained textured ceramic. This work signifies the great potential of 3D printing SL technology on the fabrication of piezoelectric ceramic elements for advanced applications.

KW - 3D printing

KW - Stereolithography

KW - Textured piezoelectric ceramic

KW - Transducer

UR - https://www.scopus.com/pages/publications/85186323439

U2 - 10.1016/j.ceramint.2024.02.225

DO - 10.1016/j.ceramint.2024.02.225

M3 - 文章

AN - SCOPUS:85186323439

SN - 0272-8842

VL - 50

SP - 51870

EP - 51876

JO - Ceramics International

JF - Ceramics International

IS - 23

ER -

3D printing PMN-PT textured ceramics for transducer applications

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this