石墨烯气凝胶/白炭黑/丁苯橡胶复合材料的制备与性能研究

Jiarui Li; Lili Xie; Jingwan Tu; Long Zheng; Zongchao Xu; Liqun Zhang; Li Liu; Shipeng Wen

doi:10.12136/j.issn.1000-890X.2020.05.0335

石墨烯气凝胶/白炭黑/丁苯橡胶复合材料的制备与性能研究

Translated title of the contribution: Preparation and Properties of Graphene Aerogel/Silica/SBR Composites

Jiarui Li
, Lili Xie
, Jingwan Tu
, Long Zheng
, Zongchao Xu
, Liqun Zhang
, Li Liu
, Shipeng Wen

Research output: Contribution to journal › Article › peer-review

1 Scopus citations

Abstract

Graphene aerogel（GA） was prepared by sol-gel and freeze drying method，and silica/GA composite filler（s-GA） was prepared by GA and silica complexing. The s-GA/silica/styrene-butadiene rubber（SBR） composites were prepared by mechanical blending and their properties were studied. The results showed that，silica was successfully complexed in the GA，the agglomeration of graphene lamellas was decreased effectively，t₉₀ of the s-GA/silica/SBR composites were shortened，and the wet skid resistance were improved. When the dosage ratio of GA/silica was 1/5，the tensile strength and elongation at break of the s-GA/silica/SBR composites were the highest. As the dosage of silica in s-GA increased，the wear resistance of s-GA/silica/SBR composites were improved.

Translated title of the contribution	Preparation and Properties of Graphene Aerogel/Silica/SBR Composites
Original language	Chinese (Traditional)
Pages (from-to)	335-340
Number of pages	6
Journal	China Rubber Industry
Volume	67
Issue number	5
DOIs	https://doi.org/10.12136/j.issn.1000-890X.2020.05.0335
State	Published - 2020
Externally published	Yes

Access to Document

10.12136/j.issn.1000-890X.2020.05.0335

Cite this

@article{20c543c3eefa4beb92c1bf4bfba0b80c,

title = "石墨烯气凝胶/白炭黑/丁苯橡胶复合材料的制备与性能研究",

abstract = "Graphene aerogel（GA） was prepared by sol-gel and freeze drying method，and silica/GA composite filler（s-GA） was prepared by GA and silica complexing. The s-GA/silica/styrene-butadiene rubber（SBR） composites were prepared by mechanical blending and their properties were studied. The results showed that，silica was successfully complexed in the GA，the agglomeration of graphene lamellas was decreased effectively，t90 of the s-GA/silica/SBR composites were shortened，and the wet skid resistance were improved. When the dosage ratio of GA/silica was 1/5，the tensile strength and elongation at break of the s-GA/silica/SBR composites were the highest. As the dosage of silica in s-GA increased，the wear resistance of s-GA/silica/SBR composites were improved.",

author = "Jiarui Li and Lili Xie and Jingwan Tu and Long Zheng and Zongchao Xu and Liqun Zhang and Li Liu and Shipeng Wen",

year = "2020",

doi = "10.12136/j.issn.1000-890X.2020.05.0335",

language = "繁体中文",

volume = "67",

pages = "335--340",

journal = "China Rubber Industry",

issn = "1000-890X",

publisher = "Editorial Office of China Rubber Industry ",

number = "5",

}

TY - JOUR

T1 - 石墨烯气凝胶/白炭黑/丁苯橡胶复合材料的制备与性能研究

AU - Li, Jiarui

AU - Xie, Lili

AU - Tu, Jingwan

AU - Zheng, Long

AU - Xu, Zongchao

AU - Zhang, Liqun

AU - Liu, Li

AU - Wen, Shipeng

PY - 2020

Y1 - 2020

N2 - Graphene aerogel（GA） was prepared by sol-gel and freeze drying method，and silica/GA composite filler（s-GA） was prepared by GA and silica complexing. The s-GA/silica/styrene-butadiene rubber（SBR） composites were prepared by mechanical blending and their properties were studied. The results showed that，silica was successfully complexed in the GA，the agglomeration of graphene lamellas was decreased effectively，t90 of the s-GA/silica/SBR composites were shortened，and the wet skid resistance were improved. When the dosage ratio of GA/silica was 1/5，the tensile strength and elongation at break of the s-GA/silica/SBR composites were the highest. As the dosage of silica in s-GA increased，the wear resistance of s-GA/silica/SBR composites were improved.

AB - Graphene aerogel（GA） was prepared by sol-gel and freeze drying method，and silica/GA composite filler（s-GA） was prepared by GA and silica complexing. The s-GA/silica/styrene-butadiene rubber（SBR） composites were prepared by mechanical blending and their properties were studied. The results showed that，silica was successfully complexed in the GA，the agglomeration of graphene lamellas was decreased effectively，t90 of the s-GA/silica/SBR composites were shortened，and the wet skid resistance were improved. When the dosage ratio of GA/silica was 1/5，the tensile strength and elongation at break of the s-GA/silica/SBR composites were the highest. As the dosage of silica in s-GA increased，the wear resistance of s-GA/silica/SBR composites were improved.

UR - https://www.scopus.com/pages/publications/85171782104

U2 - 10.12136/j.issn.1000-890X.2020.05.0335

DO - 10.12136/j.issn.1000-890X.2020.05.0335

M3 - 文章

AN - SCOPUS:85171782104

SN - 1000-890X

VL - 67

SP - 335

EP - 340

JO - China Rubber Industry

JF - China Rubber Industry

IS - 5

ER -

石墨烯气凝胶/白炭黑/丁苯橡胶复合材料的制备与性能研究

Abstract

Access to Document

Other files and links

Fingerprint

Cite this