Skip to main navigation Skip to search Skip to main content

基于电化学阻抗谱的并联电池状态差异辨识方法

Translated title of the contribution: State Difference Identification Method of Parallel Battery Module Based on Electrochemical Impedance Spectroscopy
  • Ming Dong
  • , Yang Luo
  • , Wanjun Lei
  • , Ming Ren
  • , Anxiang Guo
  • Xi'an Jiaotong University
  • State Grid Information & Telecommunication Company of Shaanxi

Research output: Contribution to journal › Article › peer-review

1 Scopus citations

Abstract

Single lithium is used in the form of a battery module in various series and parallel systems after consistency screening to meet high-voltage and significant capacity application demands of power or energy storage systems. Still, during the working process, the battery's solid electrolyte interface (SEI) continuously forms and thickens, contributing to the battery's aging. The existing battery management technology is challenging to identify the module charging and discharging promptly, which can cause thermal runaway accidents, undoubtedly endangering the safe and stable operation of large-scale energy storage. This paper employs a state difference identification method for the parallel battery module based on electrochemical impedance spectroscopy technology. Firstly, this paper aims to design a 0% to 18% state of health difference in the parallel battery modules. The electrochemical impedance spectroscopy of the battery modules is tested. The impedance characteristics of the parallel battery modules are analyzed under various states of charge and state of health. Secondly, Randles' equivalent circuit models are built. Model parameters are fitted based on EIS test results, and relaxation time analysis confirms the accuracy of the model parameters. The suitable equivalent circuit parameters are extracted. Further, Spearman's correlation analysis examines the correlation between the parameters and SOC and SOH. The parameters of strong correlation with SOH and weak correlation with SOC are identified, determining the characteristic parameters for distinguishing the state differences of the parallel battery module. Finally, a support vector machine training model is developed to distinguish between battery states. Measuring experiments were conducted using an electrochemical impedance spectroscopy testing system and a battery charging and discharging cycle system. The batteries were placed in a thermostat to ensure constant temperature conditions. An 18650 ternary lithium-ion battery was selected due to its high energy density and endurance. The samples were pretreated to achieve the best overall performance, using a 0.5C constant current and constant voltage to charge and a 0.2C constant current to discharge five times. The samples were placed in the thermostat for 5 minutes to stabilize the temperature. Then, the samples were measured, and data were collected from 100%SOC to 10%SOC. The conclusions of this study are as follows. (1) The difference in the module can make the real impedance of the EIS in the 0.01~1 Hz band and the imaginary impedance in the 1~100 Hz band show a significant difference. (2) The simulation effect of the Randles equivalent circuit is good, in which Rs, Rp1, Rp2, and the guide Y1 have high correlation with SOH, which can be used as feature parameters. (3) The support vector machine identification model can effectively identify the state difference of the parallel battery module, and the accuracy reaches 94.12%. The EIS test of the battery module can reflect the state of the internal single battery. This paper develops a battery equivalent circuit model, calculates and determines the characteristic parameters, and constructs an identification model, providing a theoretical basis and technical route for detecting battery states in large-scale battery modules after work extension.

Translated title of the contributionState Difference Identification Method of Parallel Battery Module Based on Electrochemical Impedance Spectroscopy
Original languageChinese (Traditional)
Pages (from-to)6744-6756
Number of pages13
JournalDiangong Jishu Xuebao/Transactions of China Electrotechnical Society
Volume40
Issue number20
DOIs
StatePublished - Oct 2025

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 7 - Affordable and Clean Energy
    SDG 7 Affordable and Clean Energy

Fingerprint

Dive into the research topics of 'State Difference Identification Method of Parallel Battery Module Based on Electrochemical Impedance Spectroscopy'. Together they form a unique fingerprint.

Cite this